Infoteenus
23.020.35 Gaasiballoonid
Uued standardid
EVS-EN ISO 9809-4:2026
Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 4: Stainless steel cylinders with an R m value of less than 1 100 MPa (ISO 9809-4:2026)
Käsitlusala: This document specifies the minimum requirements for the materials, design, construction and workmanship, manufacturing processes, examinations and testing at time of manufacture for refillable, seamless, stainless steel gas cylinders with water capacities up to and including 150 l.
It is applicable to cylinders for compressed, liquefied and dissolved gases with a maximum actual tensile strength, Rma, of less than 1 100 MPa.
NOTE If so desired, cylinders of water capacity between 150 l and 450 l can be manufactured to be in full conformance to this document.
It is applicable to cylinders for compressed, liquefied and dissolved gases with a maximum actual tensile strength, Rma, of less than 1 100 MPa.
NOTE If so desired, cylinders of water capacity between 150 l and 450 l can be manufactured to be in full conformance to this document.
Alusdokumendid: ISO 9809-4:2026; EN ISO 9809-4:2026
Asendab: EVS-EN ISO 9809-4:2022
EVS-EN 13807:2026
Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing
Käsitlusala: This document specifies the requirements for the design, manufacture, identification and testing of battery vehicles and multiple-element gas containers (MEGCs) containing cylinders, tubes, or bundles of cylinders. This document applies also to battery vehicles and MEGCs containing bundles of cylinders connected by a manifold which are dis-assembled from the battery vehicle and filled individually.
It is applicable to battery vehicles and MEGCs containing compressed gas, liquefied gas, and mixtures thereof. It is also applicable to battery vehicles for dissolved acetylene.
This document is not applicable to battery vehicles and MEGC for toxic gases with an LC50 value less than or equal to 200 ml/m3.
This document does not apply to battery vehicles and MEGCs containing pressure drums or tanks.
This document does not specify requirements for the vehicle chassis or motive unit.
This document is primarily intended for industrial gases other than liquefied petroleum gases (LPG).
It is applicable to battery vehicles and MEGCs containing compressed gas, liquefied gas, and mixtures thereof. It is also applicable to battery vehicles for dissolved acetylene.
This document is not applicable to battery vehicles and MEGC for toxic gases with an LC50 value less than or equal to 200 ml/m3.
This document does not apply to battery vehicles and MEGCs containing pressure drums or tanks.
This document does not specify requirements for the vehicle chassis or motive unit.
This document is primarily intended for industrial gases other than liquefied petroleum gases (LPG).
Alusdokumendid: EN 13807:2026
Asendab: EVS-EN 13807:2017
ISO 9809-4:2026
Gas cylinders — Design, construction and testing of refillable seamless steel gas cylinders and tubes — Part 4: Stainless steel cylinders with an R m value of less than 1 100 MPa
Käsitlusala: This document specifies the minimum requirements for the materials, design, construction and workmanship, manufacturing processes, examinations and testing at time of manufacture for refillable, seamless, stainless steel gas cylinders with water capacities up to and including 150 l.
It is applicable to cylinders for compressed, liquefied and dissolved gases with a maximum actual tensile strength, Rma, of less than 1 100 MPa.
NOTE If so desired, cylinders of water capacity between 150 l and 450 l can be manufactured to be in full conformance to this document.
It is applicable to cylinders for compressed, liquefied and dissolved gases with a maximum actual tensile strength, Rma, of less than 1 100 MPa.
NOTE If so desired, cylinders of water capacity between 150 l and 450 l can be manufactured to be in full conformance to this document.
Alusdokumendid:
Asendab: ISO 9809-4:2021
Asendatud standardid
EVS-EN 13807:2017
Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing
Käsitlusala: This European Standard specifies the requirements for the design, manufacture, identification and testing of battery vehicles and multiple-element gas containers (MEGCs) containing cylinders, tubes or bundles of cylinders. It is applicable to battery vehicles containing compressed gas, liquefied gas and mixtures thereof. It is also applicable to battery vehicles for dissolved acetylene. This European Standard is not applicable to toxic gases with an LC50 value less than or equal to 200 ml/m3.
This European Standard applies also to battery vehicles and MEGCs containing bundles of cylinders connected by a manifold which are dis-assembled from the battery vehicle and filled individually.
This European Standard does not apply to battery vehicles and MEGCs containing pressure drums or tanks, or to multi-element gas containers (MEGCs).
This European Standard does not specify requirements for the vehicle chassis or motive unit. This European standard does not cover requirements for sea transportation. This European Standard is primarily intended for industrial gases other than Liquefied Petroleum Gases (LPG). At the time of publication of this European Standard, there is no European Standard for dedicated LPG battery vehicles. Where there is any conflict between this European Standard and any applicable regulation, the regulation always takes precedence.
This European Standard applies also to battery vehicles and MEGCs containing bundles of cylinders connected by a manifold which are dis-assembled from the battery vehicle and filled individually.
This European Standard does not apply to battery vehicles and MEGCs containing pressure drums or tanks, or to multi-element gas containers (MEGCs).
This European Standard does not specify requirements for the vehicle chassis or motive unit. This European standard does not cover requirements for sea transportation. This European Standard is primarily intended for industrial gases other than Liquefied Petroleum Gases (LPG). At the time of publication of this European Standard, there is no European Standard for dedicated LPG battery vehicles. Where there is any conflict between this European Standard and any applicable regulation, the regulation always takes precedence.
Alusdokumendid: EN 13807:2017
Asendatud: EVS-EN 13807:2026
ISO 9809-4:2021
Gas cylinders — Design, construction and testing of refillable seamless steel gas cylinders and tubes — Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa
Käsitlusala: This document specifies the minimum requirements for the materials, design, construction and workmanship, manufacturing processes, examinations and testing at time of manufacture for refillable, seamless, stainless steel gas cylinders with water capacities up to and including 150 l.
It is applicable to cylinders for compressed, liquefied and dissolved gases with a maximum actual tensile strength, Rma, of less than 1 100 MPa.
NOTE If so desired, cylinders of water capacity between 150 l and 450 l can be manufactured to be in full conformance to this document.
It is applicable to cylinders for compressed, liquefied and dissolved gases with a maximum actual tensile strength, Rma, of less than 1 100 MPa.
NOTE If so desired, cylinders of water capacity between 150 l and 450 l can be manufactured to be in full conformance to this document.
Alusdokumendid:
Asendatud: ISO 9809-4:2026
EVS-EN ISO 9809-4:2022
Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa (ISO 9809-4:2021)
Käsitlusala: This document specifies the minimum requirements for the materials, design, construction and workmanship, manufacturing processes, examinations and testing at time of manufacture for refillable, seamless, stainless steel gas cylinders with water capacities up to and including 150 l.
It is applicable to cylinders for compressed, liquefied and dissolved gases with a maximum actual tensile strength, Rma, of less than 1 100 MPa.
NOTE If so desired, cylinders of water capacity between 150 l and 450 l can be manufactured to be in full conformance to this document.
It is applicable to cylinders for compressed, liquefied and dissolved gases with a maximum actual tensile strength, Rma, of less than 1 100 MPa.
NOTE If so desired, cylinders of water capacity between 150 l and 450 l can be manufactured to be in full conformance to this document.
Alusdokumendid: ISO 9809-4:2021; EN ISO 9809-4:2022
Asendatud: EVS-EN ISO 9809-4:2026
Kavandid
EN ISO 10156:2017/prA1
Gas cylinders - Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets - Amendment 1 (ISO 10156:2017/DAM 1:2026)
Käsitlusala: Amendment to EN ISO 10156:2017.
Alusdokumendid: ISO 10156:2017/DAmd 1; EN ISO 10156:2017/prA1