Infoteenus
33.120.30 Raadiosagedusliitmikud
Uued standardid
EVS-EN IEC 63138-4:2026
Multi-channel radio-frequency connectors - Part 4: Sectional specification for type L32-4 and L32-5 circular connectors
Käsitlusala: IEC 63138-4:2025, which is a Sectional Specification (SS), provides information and rules for the preparation of Detail Specifications (DS) for type L32-4 and L32-5 circular connectors with four RF channels and five RF channels, as well as a detailed specification of the blank format.
The L32-4 and L32-5 circular connectors with 50 Ω nominal impedance has four RF channels and five RF channels which can be engaged and disengaged at the same time. They are characterized by threaded coupling mechanisms, anti-misinsertion mechanism, and the operating frequency of each channel is up to 4 GHz. These connectors have been widely used in mobile communication system like TD-SCDMA and TD-LTE and can also be used in some similar equipment.
This document also specifies mating face dimensions for general connectors (grade 2), gauging information and tests selected from IEC 63138-1, applicable to all Detail Specifications relating to type L32 4 and L32-5 circular connectors.
This document cancels and replaces IEC 61169-59:2017.
This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to IEC 61169-59:2017:
a) use of IEC 63138-1:2019 as its generic specification instead of using IEC 61169-1:2013;
b) all the subclauses and test methods are in line with IEC 63138-1:2019;
c) dimension "g" in Table 3, Table 4, Table 7 and Table 8 has been changed from "0,00 min. to 0,8 max." to "1,6 min. to 2,1 max.".
The L32-4 and L32-5 circular connectors with 50 Ω nominal impedance has four RF channels and five RF channels which can be engaged and disengaged at the same time. They are characterized by threaded coupling mechanisms, anti-misinsertion mechanism, and the operating frequency of each channel is up to 4 GHz. These connectors have been widely used in mobile communication system like TD-SCDMA and TD-LTE and can also be used in some similar equipment.
This document also specifies mating face dimensions for general connectors (grade 2), gauging information and tests selected from IEC 63138-1, applicable to all Detail Specifications relating to type L32 4 and L32-5 circular connectors.
This document cancels and replaces IEC 61169-59:2017.
This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to IEC 61169-59:2017:
a) use of IEC 63138-1:2019 as its generic specification instead of using IEC 61169-1:2013;
b) all the subclauses and test methods are in line with IEC 63138-1:2019;
c) dimension "g" in Table 3, Table 4, Table 7 and Table 8 has been changed from "0,00 min. to 0,8 max." to "1,6 min. to 2,1 max.".
Alusdokumendid: IEC 63138-4:2026; EN IEC 63138-4:2026
Asendab: EVS-EN 61169-59:2017
Asendatud standardid
EVS-EN 61169-59:2017
Radio-frequency connectors -Part 59: Sectional specification for type L32-4 and L32-5 threaded multi-pin radio-frequency connectors
Käsitlusala: IEC 61169-59:2017, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for type L32-4 and L32-5 threaded multi-pin radio frequency connectors with anti mismating mechanism, 50 Ω nominal impedance. The operating frequency of each channel is up to 4 GHz. These connectors have been widely used in mobile communication system like TD-SCDMA and TD-LTE, and can also be used in some similar equipment.
It also prescribes mating face dimensions for general connectors-grade 2, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications relating to type L32-4 and L32-5 multi-pin connectors.
This sectional specification provides information and rules for the preparation of detail specifications for type L32-4 and L32-5 multi-pin connectors together with the pro forma blank detail specification.
This specification indicates the recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H.
It also prescribes mating face dimensions for general connectors-grade 2, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications relating to type L32-4 and L32-5 multi-pin connectors.
This sectional specification provides information and rules for the preparation of detail specifications for type L32-4 and L32-5 multi-pin connectors together with the pro forma blank detail specification.
This specification indicates the recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H.
Alusdokumendid: IEC 61169-59:2017; EN 61169-59:2017
Asendatud: EVS-EN IEC 63138-4:2026