Skip to main content
Tagasi

EVS-EN 301 489-55 V1.1.1:2025

Elektromagnetilise ühilduvuse (EMC) standard raadioseadmetele ja teenustele; Osa 55 Eritingimused maapealsete aeronavigatsiooni seadmetele, mis töötavad sagedusvahemikus 960 MHz kuni 1 215 MHz; Elektromagnetilise ühilduvuse harmoneeritud standard

Üldinfo

Kehtiv alates 03.11.2025
Alusdokumendid
ETSI EN 301 489-55 V1.1.1
Tegevusala (ICS grupid)
33 SIDETEHNIKA
Direktiivid või määrused
puuduvad
ETSI standardeid meie e-poest osta ei saa. Neid on võimalik tasuta alla laadida siit.

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
03.11.2025
Põhitekst
The present document specifies technical characteristics and methods of measurement in respect of ElectroMagnetic
Compatibility (EMC) for the following equipment:
• Secondary Surveillance Radar (SSR) interrogator;
• SSR Far Field Monitor (FFM);
• Multilateration (MLAT);
• Wide Area Multilateration (WAM);
• Distance Measurement Equipment (DME) land station transponder;
• Extended Squitter (ES) / Non Transponder (NT).
operating in the frequency range 960 MHz to 1 215 MHz.
The above mentioned radio equipment can be intended for use at a fixed location or mobile use.
The standard covers equipment consisting of one or more enclosures that contain at least one of the following
functionalities: transmitter, receiver, signal processing. Other parts which are not part of the navigation functionality
e.g. local UPS, air conditioning equipment, dehumidifying equipment, communication network equipment, etc., are not
in the scope of the present document, unless these parts are implemented inside the system enclosure(s).
NOTE 1: The relationship between the present document and essential requirements of article 3.1(b) of
Directive 2014/53/EU is given in annex A.
Technical specifications related to conducted emission EMC requirements below 9 kHz on the AC mains port of radio
equipment are not included in the present document.
NOTE 2: Such technical specifications are normally found in the relevant product family standards for AC mains
powered equipment (e.g. EN 61000-3-2 and EN 61000-3-3).

Nõutud väljad on tähistatud *

*
*
*
Standardi monitooring