Back

EVS-EN 1071-13:2010

Advanced technical ceramics - Methods of test for ceramic coatings - Part 13: Determination of wear rate by the pin-on-disk method

General information
Valid from 07.06.2010
Base Documents
EN 1071-13:2010
Directives or regulations
None

Standard history

Status
Date
Type
Name
07.06.2010
Main
1.1  This European Standard describes a method for evaluating the wear of ceramic coatings by use of a test in which a flat or spherically ended pin is brought, under load, into contact with the flat surface of a disk and the two are set in relative motion such that the pin describes a circular path on the disk. Depending on the conditions being simulated, either the pin or disk or both may be coated with the material under test, with the other member of the couple being selected for its relevance to the system under evaluation.  1.2  Where suitable equipment is available, the test may be used to determine the friction generated in the sliding contact. 1.3  The method is suitable for evaluating coatings in the thickness range from 1 µm to more than 100 µm, and with suitable choice of conditions might also be applicable to testing thinner coatings. 1.4  Testing may be under either dry or lubricated conditions. However, the test is not designed for evaluating the properties of lubricants except insofar as they affect the wear behaviour of the materials being tested. Related methods for testing lubricants using a reciprocating motion are given in references [4] – [6]. 1.5 Testing a materials couple under a range of loading conditions might provide information about the adhesive and/or cohesive strength of the coating, in addition to its wear behaviour.
*
*
*
PDF
17.08 € incl tax
Paper
17.08 € incl tax
Browse standard from 2.44 € incl tax
Standard monitoring

Customers who bought this item also bought

Main

EVS-EN 1071-12:2010

Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test
Newest version Valid from 07.06.2010
Main

EVS-EN 1071-3:2005

Advanced technical ceramics - Methods of test for ceramic coatings - Part 3: Determination of adhesion and other mechanical failure modes by a scratch test
Withdrawn from 03.05.2016
Main

EVS-EN 1071-6:2007

Advanced technical ceramics - Methods of test for ceramic coatings - Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test
Withdrawn from 03.05.2016