Back

EVS-EN 437:2018

Test gases - Test pressures - Appliance categories

General information
Valid from 19.12.2018
Base Documents
EN 437:2018
Directives or regulations
None
Standard history
Status
Date
Type
Name
Main
19.12.2018
Main
06.11.2009
Main + amendment
This document specifies the test gases, test pressures and categories of appliances relative to the use of gaseous fuels of the first, second and third families. It serves as a reference document in the specific standards for appliances that fall within the scope of the Council Directive on the approximation of the laws of Member States concerning gas appliances 2009/142/EC. The standard makes recommendations for the use of the gases and pressures to be applied for the tests. The full procedure will be given in the corresponding appliance standards. NOTE The test gases and the test pressures specified in this standard are in principle intended to be used with all the appliances in order to establish conformity with the corresponding standards. However, the use of some test gases and test pressures may not be appropriate in the following cases: — appliances with nominal heat input greater than 300 kW; — appliances constructed on site; — appliances in which the final design is influenced by the user; — appliances constructed for use with high supply pressures (notably direct use of the saturated vapour pressure). In these cases, the specific appliance standards may specify other test conditions in order to establish compliance with their requirements.
*
*
*
PDF
21.60 € incl tax
Paper
21.60 € incl tax
Price: 2.40 € incl tax
Standard monitoring
Customers who bought this item also bought
Main

EVS-EN 498:2012

Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use contact grills included
Newest version Valid from 03.02.2012
Main + amendment

EVS-EN 125:2010+A1:2015

Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices
Newest version Valid from 03.12.2015
Main

EVS-EN 10226-1:2004

Pipe threads where pressure tight joints are made on the threads - Part 1 : Taper external threads and parallel internal threads - Dimensions, tolerances and designation
Newest version Valid from 08.11.2004
Main

EVS-EN 10226-2:2005

Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
Newest version Valid from 06.10.2005