Back

EVS-EN ISO 10846-5:2009

Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Drivingpoint method for determination of the low-frequency transferstiffness of resilient supports for translatory motion

General information

Valid from 07.08.2009
Base Documents
ISO 10846-5:2008; EN ISO 10846-5:2009
ICS Groups
17.140.01 Acoustic measurements and noise abatement in general 17.160 Vibrations, shock and vibration measurements
Directives or regulations
None

Standard history

Status
Date
Type
Name
07.08.2009
Main
EVS-EN ISO 10846-5:2009
This part of ISO 10846 specifies a driving point method for determining the low-frequency transfer stiffness for translations of resilient supports, under a specified preload. The method concerns the laboratory measurement of vibrations and forces on the input side with the output side blocked, and is called the “driving point method”. The stiffness resulting from measuring the input displacement (velocity, acceleration) and input force is the dynamic driving point stiffness. Only at low frequencies, where the driving point stiffness and the transfer stiffness are equal, can this method be used for determination of the dynamic transfer stiffness.

Required fields are indicated with *

*
*
*
PDF
24.40 € incl tax
Paper
24.40 € incl tax
Browse standard from 2.44 € incl tax
Standard monitoring
English (PDF 619 KB)

Related products

Main

EVS 842:2003

Sond insulation requirements in buildings - Protection against noise
Newest version Valid from 01.06.2003
Main

EVS-EN ISO 3744:2010

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane
Newest version Valid from 06.12.2010
Main

EVS-EN ISO 3746:2010

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
Newest version Valid from 05.01.2011
Main

EVS-EN ISO 9614-2:1999

Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning
Newest version Valid from 01.01.2000

Customers who bought this item also bought

Main

ISO 2017-1:2005

Mechanical vibration and shock -- Resilient mounting systems -- Part 1: Technical information to be exchanged for the application of isolation systems
Newest version Valid from 07.02.2005
Main

ISO 2017-2:2007

Mechanical vibration and shock -- Resilient mounting systems -- Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems
Newest version Valid from 29.11.2007
Main

ISO 2017-3:2015

Mechanical vibration and shock -- Resilient mounting systems -- Part 3: Technical information to be exchanged for application of vibration isolation to new buildings
Newest version Valid from 25.11.2015
Main

EVS-EN ISO 10846-1:2008

Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines
Newest version Valid from 07.10.2008

Standards designation

EVS Estonian standard
EN European standard (published by an CEN or CENELEC)
EN ISO International standard adopted as an European standard
ISO International Organization for Standardization’s standard
IEC International Electrotechnical Commission’s standard
HD CENELEC’s harmonisation document
   
EVS-EN European standard implemented in Estonia
EVS-EN ISO International standard adopted in Europe and implemented in Estonia
EVS-EN ISO/IEC International standard/International electrotechnical standard adopted in Europe and implemented in Estonia
EVS-IEC International electrotechnical standard implemented in Estonia
EVS-ISO International standard implemented in Estonia
   
A, AMD amedment
+A a full standard plus the amendment
/A only amendment
COR, AC corrigendum
+COR a full standard plus the corrigendum
NA national annex
+NA a full standard plus the national annex
/NA only national annex
TS technical specification
TR technical report
CWA agreement, developed by a CEN or CENELEC
prEVS-EN (etc) draft standard
   
et the standard is in Estonian only
en the standard is in English only
et-en the standard is in Parallel text Estonian-English