EVS-EN ISO 11890-2:2020

Paints and varnishes - Determination of volatile organic compounds(VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2020)

General information
Valid from 16.07.2020
Base Documents
ISO 11890-2:2020; EN ISO 11890-2:2020
Directives or regulations
Standard history
This document is applicable for the determination of VOC and SVOC with an expected VOC and/or SVOC content greater than 0,01 % by mass up to 100 % by mass. The method given in ISO 11890-1 is used when the VOC is greater than 15 % by mass. This document (method ISO 11890-2) applies when the system contains VOC and SVOC as the VOC result of ISO 11890-1 can be influenced by the SVOC. For VOC content smaller than 0,1 %, the head space method described in ISO 17895 is used as an alternative. ISO 11890-1 and ISO 17895 cannot be used for the determination of the SVOC content. NOTE 1 Some ingredients of coating materials and their raw materials can decompose during analysis and cause artificial VOC and/or SVOC signals. When determining VOC and/or SVOC for coating materials and their raw materials, these signals are artefacts of the method and are not taken into account (examples are given in Annex B). This method assumes that the volatile matter is either water or organic. However, other volatile inorganic compounds can be present and might need to be quantified by another suitable method and allowed for in the calculations. The method defined in this document is not applicable for determination of water content. NOTE 2 If organic acids or bases and their corresponding salts are present in the coating material or its raw materials, the amount that is quantified by this method might not be accurate due to a change in the acid or base equilibrium.
19.32 € incl tax
PDF redline
23.18 € incl tax
19.32 € incl tax
Price: 2.40 € incl tax
Standard monitoring
Customers who bought this item also bought

EVS-EN ISO 2409:2020

Paints and varnishes - Cross-cut test (ISO 2409:2020)
Newest version Valid from 02.10.2020

EVS-EN ISO 2810:2020

Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO 2810:2020)
Newest version Valid from 15.10.2020

EVS-EN ISO 3233-1:2019

Paints and varnishes - Determination of percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry-film density by the Archimedes principle (ISO 3233-1:2019)
Newest version Valid from 16.12.2019

EVS-EN ISO 9514:2019

Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2019)
Newest version Valid from 16.07.2019