EVS-EN ISO 2409:2013

Paints and varnishes - Cross-cut test (ISO 2409:2013)

General information
Withdrawn from 02.10.2020
Base Documents
ISO 2409:2013; EN ISO 2409:2013
Directives or regulations

Standard history

EVS-EN ISO 2409:2007
This International Standard specifies a test method for assessing the resistance of paint coatings to separation from substrates when a right-angle lattice pattern is cut into the coating, penetrating through to the substrate. The property measured by this empirical test procedure depends, among other factors, on the adhesion of the coating to either the preceding coat or the substrate. This procedure is not to be regarded, however, as a means of measuring adhesion. Where a measurement of adhesion is required, the method described in ISO 4624[1] can be used. NOTE 1 Although the test is primarily intended for use in the laboratory, the test is also suitable for field testing. The method described can be used either as a pass/fail test or, where circumstances are appropriate, as a six-step classification test. When applied to a multi-coat system, assessment of the resistance to separation of individual layers of the coating from each other can be made. The test can be carried out on finished objects and/or on specially prepared test specimens. Although the method is applicable to paint on hard (e.g. metal) and soft (e.g. wood and plaster) substrates, these different substrates need a different test procedure (see Clause 6). The method is not suitable for coatings of total thickness greater than 250 μm or for textured coatings. NOTE 2 The method, when applied to coatings designed to give a rough patterned surface, will give results which will show too much variation (see also ISO 16276‑2[2]).
13.20 € incl tax
13.20 € incl tax
Browse standard for 24 hours: 2.40 € incl tax
Standard monitoring

Customers who bought this item also bought


EVS-EN ISO 6272-2:2011

Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
Newest version Valid from 06.09.2011

EVS-EN ISO 2813:2014

Paints and varnishes - Determination of gloss value at 20 degrees, 60 degrees and 85 degrees (ISO 2813:2014)
Newest version Valid from 07.11.2014

EVS-EN ISO 6272-1:2011

Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272- 1:2011)
Newest version Valid from 06.09.2011

EVS-EN ISO 3231:2000

Paints and varnishes - Determination of resistance to humid atmospheres containing sulphur dioxide
Withdrawn from 01.07.2022