Back

EVS-EN ISO 6259-2:2020

Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI) (ISO 6259-2:2020)

General information

Valid from 15.10.2020
Base Documents
ISO 6259-2:2020; EN ISO 6259-2:2020
ICS Groups
23.040.20 Plastics pipes
Directives or regulations
None

Standard history

Status
Date
Type
Name
15.10.2020
Main
EVS-EN ISO 6259-2:2020
This document specifies a method for determining the tensile properties of pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI, PVC-M or PVC-A), and in particular the following properties:
— the stress at yield and stress at break;
— the elongation at break.
NOTE The general method of test for the determination of the tensile properties of thermoplastics pipes is given in ISO 6259‑1.
This document also gives, for information purposes only, the corresponding basic specifications in Annexes A, B, C and D.

Required fields are indicated with *

*
*
*
PDF
16.12 € incl tax
Paper
16.12 € incl tax
Browse standard from 2.48 € incl tax
Standard monitoring
English (PDF 470 KB)

Related products

Main

EVS-EN 13598-2:2020

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers
Newest version Valid from 02.06.2020
Main

EVS-EN 13598-2:2016

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers
Withdrawn from 02.06.2020
Main

EVS-EN ISO 9969:2016

Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
Newest version Valid from 02.03.2016
Main

EVS-EN 12007-2:2012

Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar)
Newest version Valid from 05.09.2012

Customers who bought this item also bought

Main

EVS-EN ISO 6259-1:2015

Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015)
Newest version Valid from 07.05.2015
Main

CEN ISO/TS 16775:2021

Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 (ISO/TS 16775:2021)
Newest version Valid from 01.12.2021
Main

EVS-EN ISO 10993-2:2022

Biological evaluation of medical devices - Part 2: Animal welfare requirements (ISO 10993-2:2022)
Newest version Valid from 01.12.2022

Standards designation

EVSEstonian standard
ENEuropean standard (published by an CEN or CENELEC)
EN ISOInternational standard adopted as an European standard
ISOInternational Organization for Standardization’s standard
IECInternational Electrotechnical Commission’s standard
HDCENELEC’s harmonisation document
EVS-ENEuropean standard implemented in Estonia
EVS-EN ISOInternational standard adopted in Europe and implemented in Estonia
EVS-EN ISO/IECInternational standard/International electrotechnical standard adopted in Europe and implemented in Estonia
EVS-IECInternational electrotechnical standard implemented in Estonia
EVS-ISO International standard implemented in Estonia
 
A, AMDamedment
+Aa full standard plus the amendment
/Aonly amendment
COR, ACcorrigendum
+CORa full standard plus the corrigendum
NAnational annex
+NAa full standard plus the national annex
/NAonly national annex
TStechnical specification
TRtechnical report
CWAagreement, developed by a CEN or CENELEC
prEVS-EN (etc)draft standard
 
etthe standard is in Estonian only
enthe standard is in English only
et-enthe standard is in Parallel text Estonian-English