Skip to main content
Back

ISO 11336-2:2020

Large yachts -- Strength, weathertightness and watertightness of glazed openings -- Part 2: Glazed opening integrated into adjacent structure (elastically bonded to bulkhead or shell) design criteria, structural support, installation and testing

General information

Valid from 12.08.2020
Directives or regulations
None

Standard history

Status
Date
Type
Name
12.08.2020
Main
This document specifies technical requirements for direct adhesive bonding of glazing materials into recesses forming part of the structure of the ship and into frames that are fastened to the structure of the ship.
It is applicable to large yachts as defined in ISO 11336-1.
This document is limited to the bonding of independent glazed openings, where the bonded joint is designed to withstand local loads (from external loads coming from weather and sea conditions, internal impact loads from accidental passenger or cargo shifting, wind suction and accelerations due to ship motions).
Bonding of glazed openings where the glazing material is subjected to loads from global ship motions (bending, shear force and torsion), which are considered as structural glazed openings, are outside the scope of this document. Quantitative identification of the global deflection is also outside the scope.
Additionally, this document is limited to bonding that exhibits elastic behaviour, and excludes rigid bonding and nonlinear elastic bonding.
The design of the bonding for the following installation types is outside the scope of this document:
-  fire protected areas;
-  glazed bulwarks;
-  underwater glazing;
-  pool glazing;
-  glazing for use in polar areas;
-  unstepped IGUs.

Required fields are indicated with *

*
*
*
*
PDF
241.44 € incl tax
Paper
241.44 € incl tax
Standard monitoring

Customers who bought this item also bought

Main

EVS-EN ISO 15748-1:2002

Ships and marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design
Newest version Valid from 01.11.2002
Main

EVS-EN ISO 15748-2:2002

Ships and marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation
Newest version Valid from 01.11.2002
Main

EVS-EN ISO 15749-1:2004

Ships and marine technology - Drainage systems on ships and marine structures - Part 1: Sanitary drainage-system design
Newest version Valid from 09.09.2004
Main

EVS-EN ISO 15749-2:2004

Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity system
Newest version Valid from 09.09.2004