Tagasi

CLC/TS 50537-1:2010

Railway applications - Mounted parts of the traction transformer and cooling system -- Part 1: HV bushing for traction transformers

Üldinfo
Kehtiv alates 08.04.2010
Alusdokumendid
CLC/TS 50537-1:2010
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
08.04.2010
Põhitekst
This Technical Specification is applicable to high voltage (HV) bushings, intended for use in traction transformers of rail vehicles, cooled by insulating liquid with rated voltages up to 25 kV single phase and rated currents up to 630 A at frequencies from 16,7 Hz to 60 Hz.  HV bushings within the scope of this Technical Specification are bushings for separable connectors that connect the power supply coming from a contact wire or from a contact rail to the primary winding of the traction transformer. The Technical Specification only deals with HV bushings that are mounted to the transformer. CLC/TS 50537-1 gives consideration to both technical and normative requirements of the railway environment and restricts the variety provided by industry-wide standards for bushings, such as EN 50180 and EN 60137. It determines requirements and tests enabling the interchangeability especially regarding electrical and mechanical interfaces. Furthermore, service conditions are described. The cable plug as the counterpart of the HV bushing’s plug-in end is not covered by this Technical Specification.
*
*
*
PDF
17,08 € koos KM-ga
Paber
17,08 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 50180-2:2015

Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components
Uusim versioon Kehtiv alates 04.11.2015
Põhitekst

EVS-EN 50180-3:2015

Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 3: Requirements for bushing fixations
Uusim versioon Kehtiv alates 04.11.2015
Põhitekst

EVS-EN 50180-1:2015

Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 1: General requirements for bushings
Uusim versioon Kehtiv alates 04.11.2015
Muudatus

EVS-EN 50386:2010/A1:2013

Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers
Uusim versioon Kehtiv alates 09.09.2013