Tagasi

EVS-EN 10209:2023

Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions

Üldinfo
Kehtiv alates 15.08.2023
Alusdokumendid
EN 10209:2023
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
15.08.2023
Põhitekst
05.08.2013
Põhitekst
This document applies to cold rolled non-coated low carbon steel flat products in rolled widths equal to or over 600 mm and in thicknesses equal to or less than 3 mm, delivered in sheet, wide strip, slit wide strip or cut lengths obtained from slit wide strip or sheet.
It does not apply to cold rolled narrow strip (rolling width < 600 mm) or to cold rolled flat products for which there is a specific standard, in particular the following:
-  cold-rolled low carbon steel flat products for cold forming (EN 10130);
-  cold-rolled non-oriented electrical steel sheet and strip delivered in fully processed state (EN 10106);
-  cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state (EN 10341);
-  cold reduced blackplate (EN 10205);
-  steel sheet and strip for welded gas cylinders (EN 10120);
-  cold-rolled uncoated non-alloy mild steel narrow strip for cold forming (EN 10139);
-  cold-rolled structural steels for general purposes;
-  cold-rolled flat products made of high yield strength for cold forming (EN 10268).
*
*
*
PDF
19,52 € koos KM-ga
Paber
19,52 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

IEC 60674-3-3:2023

Plastic films for electrical purposes - Part 3:Specifications for individual materials - Sheet 3: Polycarbonate (PC) films used for electrical insulation
Uusim versioon Kehtiv alates 18.08.2023
Põhitekst

IEC 60674-3-7:2023

Plastic films for electrical purposes - Part 3: Specifications for individual materials – Sheet 7: Fluoroethylene-propylene (FEP) films used for electrical insulation
Uusim versioon Kehtiv alates 18.08.2023
Põhitekst

EVS-EN ISO 14172:2023

Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2023)
Uusim versioon Kehtiv alates 15.08.2023
Põhitekst

EVS-EN ISO 898-2:2023

Kinnitid. Süsinikterasest ja legeeritud terasest kinnitite mehaanilised omadused. Osa 2: Spetsifitseeritud omadusklassidega mutrid
Uusim versioon Kehtiv alates 15.02.2023