Skip to main content
Tagasi

EVS-EN 10225-3:2019

Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 3: Hot finished hollow sections

Üldinfo

Kehtetu alates 01.06.2023
Alusdokumendid
EN 10225-3:2019
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
01.06.2023
Põhitekst + muudatus
03.06.2019
Põhitekst
04.09.2009
Põhitekst
This document specifies requirements for weldable structural steels made of hot finished seamless and high frequency welded hollow sections to be used in the fabrication of fixed offshore structures.
The following thickness limitations are given in this standard:
-  for seamless hollow sections up to and including 65 mm;
-  for HFW hollow sections up to and including 25,4 mm.
Greater thicknesses can be agreed, provided the technical requirements of this European Standard are maintained.
This European Standard is applicable to steels for offshore structures, designed to operate in the offshore sector but not to steels supplied for the fabrication of subsea pipelines, risers, process equipment, process piping and other utilities. It is primarily applicable to the North Sea Sector, but may also be applicable in other areas provided that due consideration is given to local conditions e.g. design temperature.
NOTE  This document has an informative Annex E on the prequalification of steels for fixed offshore structures in arctic areas.
Minimum yield strengths up to 770 MPa are specified together with impact properties at temperatures down to -40 °C.

Nõutud väljad on tähistatud *

*
*
*
PDF
31,72 € koos KM-ga
Paber
31,72 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 10225-4:2019

Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 4: Cold formed welded hollow sections
Uusim versioon Kehtiv alates 03.06.2019
Põhitekst

EVS-EN 10225-2:2019

Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 2: Sections
Uusim versioon Kehtiv alates 03.06.2019
Põhitekst

EVS-EN 10225-1:2019

Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 1: Plates
Uusim versioon Kehtiv alates 03.06.2019
Põhitekst

EVS-EN 1090-3:2019

Teras- ja alumiiniumkonstruktsioonide valmistamine. Osa 3: Tehnilised nõuded alumiiniumkonstruktsioonidele
Uusim versioon Kehtiv alates 03.06.2019