Tagasi

Vabandust – see toode pole enam saadaval

EVS-EN 12020-2:2008

Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form

Üldinfo
Kehtetu alates 03.01.2017
Alusdokumendid
EN 12020-2:2008
Tegevusala (ICS grupid)
77.150.10 Alumiiniumtooted
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
03.01.2017
Põhitekst
09.06.2008
Põhitekst
EVS-EN 12020-2:2008
Põhitekst
EVS-EN 12020-2:2001
This document specifies tolerances on dimensions and form of extruded precision profiles, in alloys EN AW-6060 and EN AW-6063 manufactured with and without a thermal barrier (see Figures 1 and 2). It applies to extruded products supplied without further surface treatment. Precision profiles covered in this standard are distinguished from extruded profiles for general applications covered in EN 755-9 by the following characteristics: - they are mainly for architectural applications; - they meet more stringent requirements regarding the surface condition of visible surfaces; - the maximum diameter of the circumscribing circle CD is 350 mm; - they are made to closer tolerances on dimensions and form. In the case of profiles which, due to the complexity of their design, are difficult to manufacture and specify, then special agreements between supplier and purchaser may need to be reached. NOTE The effect of the thermal barrier material on the dimensional tolerances is covered by this document although the actual thermal barrier material itself is not (see EN 14024).
*
*
*
PDF
11,58 € koos KM-ga
Paber
11,58 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 755-9:2008

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
Kehtetu alates 05.07.2016
Põhitekst

EVS-EN ISO 10042:2006

Keevitus. Alumiiniumi ja selle sulamite kaarkeevitatud liited. Kvaliteeditasemed keevitusdefektide järgi
Kehtetu alates 04.09.2018
Rahvuslik lisa

EVS-EN 1999-1-2/NA:2010

Eurokoodeks 9: Alumiiniumkonstruktsioonide projekteerimine. Osa 1-2: Tulepüsivusarvutus. Eesti standardi rahvuslik lisa
Uusim versioon Kehtiv alates 06.09.2010
Muudatus

EVS-EN 1999-1-1:2007/A2:2013

Eurokoodeks 9: Alumiiniumkonstruktsioonide projekteerimine. Osa 1-1: Üldreeglid ja reeglid hoonete projekteerimiseks
Uusim versioon Kehtiv alates 06.01.2014