Skip to main content
Tagasi

EVS-EN 12814-4:2018

Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test

Üldinfo

Kehtiv alates 16.04.2018
Alusdokumendid
EN 12814-4:2018
Tegevusala (ICS grupid)
25.160.40 Keevisliited
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
01.08.2018
Parandus
16.04.2018
Põhitekst
04.04.2002
Põhitekst
This document specifies the dimensions, the method of sampling and the preparation of the test specimens, and also the conditions for performing the peel test perpendicular to the weld in order to determine the peel resistance and the failure behaviour.
A peel test can be used in conjunction with other tests (e.g. tensile creep, macroscopic examination...) to assess the performance of welded assemblies, made from thermoplastics materials.
Peel tests are applicable to overlap welded assemblies made from thermoplastics materials.
The T-peel test as defined in Clause 5 will be used only for assessing welded sheet assemblies. This test is not applicable to welded test pieces containing sheets of different nominal thickness.
The decohesion test as defined in Clause 6 will be used only for assessing electrofusion joints with nominal thickness of pipe/fitting greater than 10 mm.
For socket fusion and for electrofusion socket joints with nominal outside diameter less than or equal to 90 mm, a crush test will be used, as defined in Clause 7.
The crush test can also be used for electrofusion joints with outside diameters greater than 90 mm.
The crush test for electrofusion saddle joints will be performed in accordance with ISO 13955 [1].
NOTE  A decohesion test is also defined in ISO 13954 [2].
The tests defined in this standard are not intended to be used for assessment and/or qualification of thermoplastic fittings that already have their own requirements, e.g. polyethylene fittings according to EN 1555-3 [3] and EN 12201-3 [4].

Nõutud väljad on tähistatud *

*
*
*
PDF
15,86 € koos KM-ga
Paber
15,86 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 12814-8:2021

Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
Uusim versioon Kehtiv alates 15.02.2021
Põhitekst

EVS-EN 12814-2:2021

Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
Uusim versioon Kehtiv alates 15.02.2021
Põhitekst

EVS-EN ISO 6270-1:2018

Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure) (ISO 6270-1:2017)
Uusim versioon Kehtiv alates 15.02.2018
Põhitekst

EVS-EN 12814-1:2000

Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test
Uusim versioon Kehtiv alates 01.04.2000