Tagasi

EVS-EN 50325-1:2019

Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 1: General requirements

Üldinfo
Kehtiv alates 02.01.2020
Alusdokumendid
EN 50325-1:2019
Direktiivid või määrused
puuduvad
Standardi ajalugu
Staatus
Kuupäev
Tüüp
Nimetus
02.01.2020
Põhitekst
01.06.2003
Põhitekst
This European Standard applies to controller device interfaces that provide defined interfaces between low voltage switchgear, controlgear, control circuit devices, switching elements and controlling devices (e.g. programmable controllers, personal computers, etc.). It may also be applied for the interfacing of other devices and elements to a controller device interface. This standard specifies requirements for controllers and devices utilising these interfaces, including not only the communication protocol specification, but also associated relevant electrical and mechanical characteristics. It also specifies the electrical and EMC tests required to verify the performance of each controller device interface when connected to the appropriate controllers and devices. This part 1 establishes a consistent terminology and format for the subsequent interfaces. It also harmonises requirements of a general nature in order to reduce the need for testing to different standards, increase understanding and facilitate comparisons of controller device interface standards. Those requirements of the various controller device interface standards which can be considered as general have therefore been gathered in this part 1. In addition to meeting the specific requirements stated in this part 1, the controller device interfaces included in this standard are documented in the English language in accordance with the requirements specified in this part 1, are already in use in commercial products and running in industrial plants, are available in quantity and at low price, are available from several sources and commercialised openly, to satisfy the tests specified, amongst others, in EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, and EN 61000-4-6 against the test levels specified in EN 50082 2, have appropriate mechanisms for transmission error detection, are open, widely accepted, well documented, stable and support inter operability, are complete and describe the necessary interfaces in sufficient detail to enable error free implementation, are free of any restriction related to testing the implementation. For each controller device interface only two documents are necessary to determine all requirements and tests: the general requirements of this standard, referred to as "part 1" in the relevant parts covering the various types of controller device interfaces; the relevant controller device interface standard hereinafter referred to as the "relevant controller device interface standard" or "controller device interface standard". The solutions described in this standard have been used for many years by industry to solve application requirements involving low voltage switchgear and controlgear. They are characterised by: their ability to power connected devices directly from the network; their ability to operate in harsh environments typified by those encountered at the machine level by controls in industrial applications; usage of the sophisticated medium access rules of CAN which allows both organisation of traffic based on user assigned priorities and efficient resolution of occasional access conflict; a wide range of exchange services allowing precise tailoring of data exchange to the actual application needs as well as simultaneous distribution of data to a selected set of connected devices; their capability to simultaneously support data acquisition, diagnostics, messaging and programming/configuration as required, amongst others, for systems interfacing controllers to low voltage switchgear and controlgear in industrial applications. NOTE The controller device interface standards currently part of this series are: EN 50325-2: DeviceNet EN 50325-3: Smart Distributed System (SDS) EN 50325-4: CANopen EN 50325-5 : Functional safety communication based on EN 50325-4.
*
*
*
PDF
10,46 € koos KM-ga
Paber
10,46 € koos KM-ga
Sirvi standardit: 2,40 € koos KM-ga
Standardi monitooring
Teised on ostnud veel
Põhitekst

EVS-EN 50325-1:2003

Industrial comunications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 1: General requirements
Kehtetu alates 02.01.2020
Põhitekst

EVS-EN 50325-4:2003

Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 4: CANopen
Uusim versioon Kehtiv alates 01.06.2003
Põhitekst

EVS-EN 50325-5:2010

Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 5: Functional safety communication based on EN 50325-4
Uusim versioon Kehtiv alates 04.11.2010
Põhitekst

EVS-EN 50498:2010

Elektromagnetiline ühilduvus. Sõidukitele pärast müüki paigaldatavate elektroonikaseadmete tooteperekonnastandard
Uusim versioon Kehtiv alates 04.11.2010