Tagasi

EVS-EN ISO 13938-2:2019

Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO 13938-2:2019)

Üldinfo
Kehtiv alates 02.01.2020
Alusdokumendid
ISO 13938-2:2019; EN ISO 13938-2:2019
Tegevusala (ICS grupid)
59.080.30 Kangasmaterjalid
Direktiivid või määrused
puuduvad
Standardi ajalugu
Staatus
Kuupäev
Tüüp
Nimetus
02.01.2020
Põhitekst
01.01.2000
Põhitekst
This document describes a pneumatic pressure method for the determination of bursting strength and bursting distension of textile fabrics. NOTE ISO 13938-1 describes a method using hydraulic pressure. The method is applicable to knitted, woven, nonwoven and laminated fabrics. It can be suitable for fabrics produced by other techniques. The test is suitable for test specimens in the conditioned or wet state. From the available data there appears to be no significant difference in the bursting strength results achieved using hydraulic or pneumatic burst testers, for pressures up to 800 kPa. This pressure range covers the majority of performance levels expected of general apparel. For speciality textiles requiring high bursting pressures, the hydraulic apparatus is more suitable.
*
*
*
PDF
8,86 € koos KM-ga
Paber
8,86 € koos KM-ga
Hind: 2,40 € koos KM-ga
Standardi monitooring
Teised on ostnud veel
Põhitekst

EVS-EN ISO 13938-1:2019

Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:2019)
Uusim versioon Kehtiv alates 16.12.2019
Põhitekst

EVS-EN ISO 22612:2005

Nakkusohtlike osakeste kaitseriietus. Kuivbakterite läbilaskekindluse katsemeetod
Uusim versioon Kehtiv alates 09.06.2005
Põhitekst

EVS-EN ISO 13506-1:2017

Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin (ISO 13506-1:2017)
Uusim versioon Kehtiv alates 04.09.2017
Põhitekst

EVS-EN ISO 2418:2017

Leather - Chemical, physical and mechanical and fastness test - Sampling location (ISO 2418:2017)
Uusim versioon Kehtiv alates 02.03.2017