Tagasi

EVS-EN ISO 15156-3:2015

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2015)

Üldinfo
Kehtetu alates 15.12.2020
Alusdokumendid
ISO 15156-3:2015; EN ISO 15156-3:2015
Direktiivid või määrused
puuduvad
Standardi ajalugu
Staatus
Kuupäev
Tüüp
Nimetus
15.12.2020
Põhitekst
06.10.2015
Põhitekst
06.01.2010
Põhitekst
EVS-EN ISO 15156-3:2009
This part of ISO 15156 gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards, or regulations. This part of ISO 15156 addresses the resistance of these materials to damage that can be caused by sulfide stress-cracking (SSC), stress-corrosion cracking (SCC), and galvanically induced hydrogen stress cracking (GHSC). This part of ISO 15156 is concerned only with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed.
*
*
*
PDF
26,58 € koos KM-ga
Paber
26,58 € koos KM-ga
Hind: 2,40 € koos KM-ga
Standardi monitooring
Teised on ostnud veel
Põhitekst

EVS-EN ISO 15156-1:2015

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2015)
Kehtetu alates 15.12.2020
Põhitekst

EVS-EN ISO 15156-2:2015

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2015)
Kehtetu alates 15.12.2020
Põhitekst

EVS-EN ISO 9445-2:2010

Pidevkülmvaltsitud roostevaba teras. Mõõtmete ja kuju tolerantsid. Osa 2: Lai riba ja leht
Uusim versioon Kehtiv alates 06.04.2010
Põhitekst

EVS-EN 10217-7:2014

Surveotstarbelised keevitatud terastorud. Tehnilised tarnetingimused. Osa 7: Roostevabast terasest torud
Uusim versioon Kehtiv alates 09.12.2014