Skip to main content
Tagasi

EVS-EN ISO 16090-1:2018

Machine tools safety - Machining centres, Milling machines, Transfer machines - Part 1: Safety requirements (ISO 16090-1:2017)

Üldinfo

Kehtetu alates 30.12.2022
Alusdokumendid
ISO 16090-1:2017; EN ISO 16090-1:2018
Tegevusala (ICS grupid)
25.080.01 Tööpingid üldiselt
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
30.12.2022
Põhitekst
16.04.2018
Põhitekst
06.04.2010
Parandus
06.04.2010
Parandus
06.04.2010
Parandus
04.06.2009
Põhitekst + muudatus
03.04.2009
Põhitekst + muudatus
03.04.2009
Põhitekst + muudatus
ISO 16090-1:2017 specifies the technical safety requirements and protective measures for the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of stationary milling machines (see 3.1.1), including machines capable of performing boring operations (see 3.1.2), machining centres and transfer machines which are intended to cut cold metal, and other non-combustible cold materials except for wood or materials with physical characteristics similar to those of wood as defined in ISO 19085‑1, and for glass, stone and engineered/agglomerated materials as defined in EN 14618.
ISO 16090-1:2017 covers the following machines:
a) manually, without numerical control, operated boring and milling machines (see 3.2.1, Group 1), e.g. knee and column type milling machines (see Figures C.1 and C.2);
b) manually, with limited numerical control, operated boring and milling machines (see 3.2.2, Group 2), e.g. profile and contouring milling machines (see Figures C.3 and C.4);
c) numerically controlled milling machines and machining centres (see 3.2.3, Group 3), e.g. automatic milling machines and milling centres, e.g. multi-spindle milling machines, gear-milling machines (see Figures C.5, C.6 and C.7);
d) transfer and special-purpose machines (see 3.2.4, Group 4), which are designed to process only pre-specified workpieces or limited range of similar workpieces by means of a predetermined sequence of machining operations and process parameters (see Figures C.8, C.9, C.10, C.11, C.12 and C.13).
ISO 16090-1:2017 also applies to machines fitted with the following devices/facilities:
- tool magazine(s);
- tool changer(s);
- workpiece handling mechanism(s);
- powered workpiece clamping mechanism(s);
- swarf/chip conveyor(s);
- power-operated door(s);
- additional equipment for turning;
- additional equipment for grinding.
When in this document the sole word "machine" or "machines" is being used, it is referred to all above-mentioned groups and types of machines.
ISO 16090-1:2017 deals with all significant hazards, hazardous situations and events relevant to this type of machinery which may occur during transportation, assembly and installation, setting, operation, cleaning and maintenance, troubleshooting, dismantling or disabling according to ISO 12100, when the machinery is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
ISO 16090-1:2017 presumes accessibility to the machine from all directions and specifies access conditions to operator positions. It also applies to workpiece transfer devices including transport devices for loading/unloading when they form an integral part of the machine.

Nõutud väljad on tähistatud *

*
*
*
PDF
46,36 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 16092-1:2018

Tööpinkide ohutus. Pressid. Osa 1: Üldised ohutusnõuded
Uusim versioon Kehtiv alates 15.02.2018
Põhitekst

EVS-EN ISO 16089:2015

Tööpingid. Ohutus. Statsionaarsed lihvimismasinad
Uusim versioon Kehtiv alates 05.01.2016
Põhitekst

EVS-EN ISO 16092-3:2018

Tööpinkide ohutus. Pressid. Osa 3: Hüdrauliliste presside ohutusnõuded
Uusim versioon Kehtiv alates 16.03.2018
Põhitekst + muudatus

EVS-EN 12622:2010+A1:2013

Tööpinkide ohutus. Hüdraulilised painutuspressid
Uusim versioon Kehtiv alates 14.11.2013