Skip to main content
Tagasi

EVS-EN ISO 16120-1:2011

Mittelegeerterasest varras tõmbamiseks ja/või külmvaltsimiseks. Osa 1: Üldnõuded (ISO 16120-1:2011)

Üldinfo

Kehtetu alates 16.06.2017
Alusdokumendid
ISO 16120-1:2011; EN ISO 16120-1:2011
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
16.06.2017
Põhitekst
03.08.2011
Põhitekst
Põhitekst
EVS-EN 10016-1:1999
1.1 ISO 16120 is applicable to wire rod of non-alloy steel intended for wire drawing and/or cold rolling. The cross-section can be circular, oval, square, rectangular, hexagonal, octagonal, half-round or another shape, generally with at least 5 mm nominal dimension, and with a smooth surface. 1.2 This part of ISO 16120 covers general requirements and is not applicable to products for which standards exist or are in development, for example: - steel wire rod intended for heat treatment; - free-cutting steel wire rod; - steel wire rod for cold heading and cold extrusion; - steel wire rod intended for the production of electrodes and products for welding; - steel wire rod for welded fabric for reinforcement for concrete; - steel wire rod for ball and roller bearings (see ISO 683-17); - steel wire rod for wire for high fatigue strength mechanical springs, such as valve springs. 1.3 In addition to the requirements of this part of ISO 16120, the general technical delivery requirements specified in ISO 404 apply.

Nõutud väljad on tähistatud *

*
*
*
PDF
19,52 € koos KM-ga
Paber
19,52 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 16120-2:2011

Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general-purpose wire rod (ISO 16120-2:2011)
Kehtetu alates 02.03.2017
Põhitekst

EVS-EN ISO 16120-3:2011

Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod (ISO 16120-3:2011)
Uusim versioon Kehtiv alates 03.08.2011
Põhitekst

EVS-EN ISO 16120-4:2011

Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications (ISO 16120-4:2011)
Kehtetu alates 16.06.2017