Skip to main content
Tagasi

EVS-EN ISO 16276-1:2025

Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing (ISO 16276-1:2025)

Üldinfo

Kehtiv alates 01.07.2025
Alusdokumendid
ISO 16276-1:2025; EN ISO 16276-1:2025
Tegevusala (ICS grupid)
87.020 Värvimistehnoloogia
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
01.07.2025
Põhitekst
04.07.2007
Põhitekst
This document specifies procedures for assessing the fracture strength of a protective paint coating of any thickness on a steel substrate of thickness not less than 3 mm. The procedures given in document are based on methods used with different types of pull-off test equipment. The results obtained using such different types of equipment are not comparable.
This document is only applicable if a fracture strength value is specified, together with the type of test equipment and the manufacturer of the equipment. Usually, this information is included in contract documentation.
This document also specifies suitable equipment and defines inspection areas, sampling plans and acceptance/rejection criteria.
It does not give any values of the fracture strength of different protective paint coatings.

Nõutud väljad on tähistatud *

*
*
*
*
PDF
16,12 € koos KM-ga
Paber
16,12 € koos KM-ga
Sirvi standardit alates 2,48 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 16276-2:2025

Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing (ISO 16276-2:2025)
Uusim versioon Kehtiv alates 02.06.2025
Põhitekst

EVS-EN ISO 8502-3:2017

Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:2017)
Uusim versioon Kehtiv alates 02.03.2017
Põhitekst

EVS-EN ISO 8503-1:2012

Teraspindade ettevalmistamine enne värvide ja nendega seotud materjalide pealekandmist. Pritspuhastatud teraspinna kareduse iseloomustus. Osa 1: Tehnilised andmed ja määratlused ISO pinnaprofiilikomparaatorite kohta, mis on ette nähtud abrasiiviga pritspuhastatud pindade hindamiseks (ISO 8503-1:2012)
Uusim versioon Kehtiv alates 04.04.2012
Põhitekst

EVS-EN ISO 8503-2:2012

Teraspindade ettevalmistamine enne värvide ja nendega seotud materjalide pealekandmist. Pritspuhastatud teraspinna kareduse iseloomustus. Osa 2: Abrasiiviga pritspuhastatud pinnaprofiilide liigitamise meetod. Komparaatorimeetod (ISO 8503-2:2012)
Uusim versioon Kehtiv alates 04.04.2012