Skip to main content
Tagasi

EVS-EN ISO 4042:2022

Fasteners - Electroplated coating systems (ISO 4042:2022)

Üldinfo

Kehtiv alates 01.07.2022
Alusdokumendid
ISO 4042:2022; EN ISO 4042:2022
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
01.07.2022
Põhitekst
03.10.2018
Põhitekst
This document specifies requirements for steel fasteners with electroplated coatings and coating systems. The requirements related to dimensional properties also apply to fasteners made of copper or copper alloys.
It also specifies requirements and gives recommendations to minimize the risk of hydrogen embrittlement, see 4.4 and Annex B.
It mainly applies to fasteners with zinc and zinc alloy coating systems (zinc, zinc-nickel, zinc-iron) and cadmium, primarily intended for corrosion protection and other functional properties:
—    with or without conversion coating,
—    with or without sealant,
—    with or without top coat,
—    with or without lubricant (integral lubricant and/or subsequently added lubricant).
Specifications for other electroplated coatings and coating systems (tin, tin-zinc, copper-tin, copper-silver, copper, silver, copper-zinc, nickel, nickel-chromium, copper-nickel, copper-nickel-chromium) are included in this document only for dimensional requirements related to fasteners with ISO metric threads.
The requirements of this document for electroplated fasteners take precedence over other documents  dealing with electroplating.
This document applies to steel bolts, screws, studs and nuts with ISO metric thread, to other threaded fasteners and to non-threaded fasteners such as washers, pins, clips and rivets.
NOTE       Electroplating is also applied to stainless steel fasteners, e.g. for the purpose of lubrication in order to avoid galling.
Information for design and assembly of coated fasteners is given in Annex A.
This document does not specify requirements for properties such as weldability or paintability.

Nõutud väljad on tähistatud *

*
*
*
PDF
32,24 € koos KM-ga
PDF redline
41,91 € koos KM-ga
Paber
32,24 € koos KM-ga
Sirvi standardit alates 2,48 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

ISO 15226:1999

Technical product documentation -- Life cycle model and allocation of documents
Uusim versioon Kehtiv alates 01.04.1999
Põhitekst

EVS-EN ISO 11442:2006

Toote tehniline dokumentatsioon. Arvutil põhineva tehnilise informatsiooni töötlemine. Osa 1: Andmekaitsenõuded
Uusim versioon Kehtiv alates 05.05.2006
Põhitekst

EVS-EN ISO 6433:2012

Technical product documentation - Part references (ISO 6433:2012)
Uusim versioon Kehtiv alates 05.06.2012
Põhitekst

EVS-EN ISO 3098-1:2015

Technical product documentation - Lettering - Part 1: General requirements (ISO 3098-1:2015)
Uusim versioon Kehtiv alates 02.04.2015