Skip to main content
Tagasi

EVS-EN ISO 4498:2010

Metallkeraamilised materjalid, välja arvatud kõvasulamid. Näivkõvaduse määramine. Osa 1: Materjalid, mille kõvadus ristlõike ulatuses on põhiliselt ühtlane

Üldinfo

Kehtiv alates 04.10.2010
Alusdokumendid
ISO 4498:2010; EN ISO 4498:2010
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
04.10.2010
Põhitekst
1.1 This International Standard specifies methods of hardness testing of sintered metal materials, excluding hardmetals. 1.2 Procedure 1 determines the apparent hardness of the whole material. Procedure 1 - applies to sintered metal materials which have either not been subjected to any heat treatment, or which have been heat treated in such a way that the hardness is essentially uniform to a depth of at least 5 mm below the surface, - applies to the surfaces of sintered metal materials which have been treated in such a way that the hardness is not uniform in the section to a depth of 5 mm below the surface, - therefore applies to materials in which the hardness is obtained essentially by surface enrichment by carbon, or by carbon and nitrogen (for example by carburizing, carbonitriding, nitrocarburizing or sulfidizing), and - applies to materials which have been induction hardened.1.3 Procedure 2 determines the microhardness of the metal phase. Procedure 2 - applies to all types of sintered metal materials, - is used, in particular, to determine the hardness profile of case-hardened or carbonitrided materials in accordance with the method described in ISO 4507, and - also applies to any sintered metallic materials which have been subjected to surface treatments such as electrodeposited plating, chemical coating, chemical vapour deposition (CVD), physical vapour deposition (PVD), laser, ion bombardment, etc. To determine the microhardness of treated surfaces, Procedure 2 applies.

Nõutud väljad on tähistatud *

*
*
*
PDF
15,86 € koos KM-ga
Paber
15,86 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 844:2014

Rigid cellular plastics - Determination of compression properties (ISO 844:2014)
Kehtetu alates 03.05.2021
Põhitekst

EVS-EN ISO 1798:2008

Flexible cellular polymeric materials - Determination of tensile strength and elongation at break
Uusim versioon Kehtiv alates 07.04.2008
Põhitekst

EVS-EN ISO 3451-1:2019

Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:2019)
Uusim versioon Kehtiv alates 15.03.2019
Põhitekst

EVS-EN 12543-2:2008

Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
Kehtetu alates 03.05.2021