Tagasi

EVS-EN ISO 4628-8:2012

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012)

Üldinfo
Kehtiv alates 05.12.2012
Alusdokumendid
ISO 4628-8:2012; EN ISO 4628-8:2012
Tegevusala (ICS grupid)
87.040 Värvid ja lakid
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
05.12.2012
Põhitekst
This part of ISO 4628 specifies a method for assessing delamination and corrosion around a scribe or other artificial defect on a coated panel or other coated test specimen, caused by a corrosive environment. This part of ISO 4628 does not cover evaluation of pitting corrosion or pit depth. NOTE 1 Examples of corrosive environments are artificial atmospheres such as salt spray, as used in the test method specified in ISO 9227,[7] and sea water immersion as used in the test method specified in ISO 15711.[8] Natural environments can also be used. NOTE 2 The extent of other defects can also be determined at the same time as delamination and corrosion. Methods are given as follows: — blistering in accordance with ISO 4628-2;[2] — rusting in accordance with ISO 4628-3;[3] — cracking in accordance with ISO 4628-4;[4] — flaking in accordance with ISO 4628-5;[5] — filiform corrosion in accordance with ISO 4628-10.[6]
*
*
*
PDF
10,98 € koos KM-ga
Paber
10,98 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 4628-2:2016

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016)
Uusim versioon Kehtiv alates 02.03.2016
Põhitekst

EVS-EN ISO 4628-3:2016

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016)
Uusim versioon Kehtiv alates 02.03.2016
Põhitekst

EVS-EN ISO 4628-4:2016

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016)
Uusim versioon Kehtiv alates 02.03.2016
Põhitekst

EVS-EN ISO 4628-5:2016

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016)
Kehtetu alates 01.12.2022