Tagasi

EVS-EN ISO 7599:2010

Anodizing of aluminium and its alloys - General specifications for anodic oxidation coatings on aluminium

Üldinfo
Kehtetu alates 01.03.2018
Alusdokumendid
ISO 7599:2010; EN ISO 7599:2010
Tegevusala (ICS grupid)
25.220.20 Pinnatöötlus
Direktiivid või määrused
puuduvad
Standardi ajalugu
Staatus
Kuupäev
Tüüp
Nimetus
01.03.2018
Põhitekst
04.10.2010
Põhitekst
Põhitekst
EVS-EN 12373-1:2002
This International Standard lays down a method for specifying decorative and protective anodic oxidation coatings on aluminium (including aluminium-based alloys). It defines the characteristic properties of anodic oxidation coatings, lists methods of test for checking the characteristic properties, provides minimum performance requirements, and gives information on the grades of aluminium suitable for anodizing and the importance of pretreatment to ensure the required appearance or texture of the finished work. It is not applicable to a) non-porous oxidation coatings of the barrier layer type, b) oxidation coatings produced by chromic acid or phosphoric acid anodizing, c) oxidation coatings intended merely to prepare the substrate for subsequent application of organic coatings or electrodeposition of metals, d) hard anodic oxidation coatings used mainly for engineering purposes, for which abrasion and wear resistance are the primary characteristics (see ISO 10074).
*
*
*
PDF
15,01 € koos KM-ga
Paber
15,01 € koos KM-ga
Hind: 2,40 € koos KM-ga
Standardi monitooring
Teised on ostnud veel
Põhitekst

ISO 6362-2:2014

Wrought aluminium and aluminium alloys -- Extruded rods/bars, tubes and profiles -- Part 2: Mechanical properties
Uusim versioon Kehtiv alates 10.09.2014
Põhitekst

ISO 6362-7:2014

Wrought aluminium and aluminium alloys -- Extruded rods/bars, tubes and profiles -- Part 7: Chemical composition
Uusim versioon Kehtiv alates 17.09.2014
Põhitekst

EVS-EN 61310-1:2008

Masinate ohutus. Tuvastus, märgistus ja aktiveerimine. Osa 1: Nõuded visuaal-, audio- ja puutesignaalidele
Uusim versioon Kehtiv alates 07.04.2008
Põhitekst

EVS-EN 61310-2:2008

Masinate ohutus. Tuvastust, märgistus ja aktiveerimine. Osa 2: Nõuded märgistusele
Uusim versioon Kehtiv alates 07.04.2008