Skip to main content

IEC 60793-1-44:2023 CMV

Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength


Kehtiv alates 24.07.2023
Direktiivid või määrused

Standardi ajalugu

IEC 60793-1-44:2023 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC 60793-1-44:2023 edition 3.0 and the previous IEC 60793-1-44:2011 edition 2.0. Furthermore, comments from IEC SC 86A experts are provided to explain the reasons of the most relevant changes, or to clarify any part of the content.

IEC 60793-1-44:2023 establishes uniform requirements for measuring the cut-off wavelength of single-mode optical fibre, thereby assisting in the inspection of fibres and cables for commercial purposes. This document gives methods for measuring the cut-off wavelength for uncabled or cabled single mode telecom fibre. These procedures apply to all category B and C fibre types. There are three methods of deployment for measuring the cut-off wavelength:
- method A: cable cut-off using uncabled fibre 22 m long sample, lcc;
- method B: cable cut-off using cabled fibre 22 m long sample, lcc;
- method C: fibre cut-off using uncabled fibre 2 m long sample, lc.
All methods require a reference measurement. There are two reference-scan techniques, either or both of which can be used with all methods:
- bend-reference technique;
- multimode-reference technique using category A1(OM1-OM5) multimode fibre.
This third edition cancels and replaces the second edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) used the diameter of the fibre loops to describe deployment;
b) added Annex D related to cut-off curve artifacts;
c) reorganized information and added more figures to clarify concepts.

Nõutud väljad on tähistatud *

423,50 € koos KM-ga
423,50 € koos KM-ga
Standardi monitooring