Skip to main content
Tagasi

ISO 11228-1:2021

Ergonomics — Manual handling — Part 1: Lifting, lowering and carrying

Üldinfo

Kehtiv alates 05.10.2021
Tegevusala (ICS grupid)
13.180 Ergonoomia
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
05.10.2021
Põhitekst
20.05.2003
Põhitekst
This document specifies recommended limits for manual lifting, lowering and carrying while taking into account the intensity, the frequency and the duration of the task. It is designed to provide requirements and recommendations on the assessment of several task variables, allowing the health risks for the working population to be evaluated.
This document applies to manual handling of objects with a mass of 3 kg or more and to moderate walking speed, i.e. 0,5 m/s to 1,0 m/s on a horizontal level surface.
This document is based on an 8 h working day, but also covers more prolonged working times, up to 12 h. It also addresses the analysis of combined lifting, lowering and carrying tasks in a shift during a day.
This document does not cover the holding of objects (without walking), the pushing or pulling of objects or manual handling while seated. The pushing and pulling of objects are covered in the other parts of the ISO 11228 series.
This document does not cover handling people or animals. (For further information on handling people, refer to ISO/TR 12296.)
This document does not address the manual lifting of objects while using lift-assistive devices such as exoskeletons and does not address the needs of pregnant women or persons with disabilities.

Nõutud väljad on tähistatud *

*
*
*
PDF
254,36 € koos KM-ga
Paber
254,36 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst + muudatus

EVS-EN 62262:2008+A1:2021

Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) (IEC 62262:2002 + IEC 62262:2002/AMD1:2021)
Uusim versioon Kehtiv alates 15.12.2021
Põhitekst

ISO 21920-1:2021

Geometrical product specifications (GPS) — Surface texture: Profile — Part 1: Indication of surface texture
Uusim versioon Kehtiv alates 20.12.2021
Põhitekst

ISO 13920:2023

Welding — General tolerances for welded constructions — Dimensions for lengths and angles, shape and position
Uusim versioon Kehtiv alates 02.06.2023
Põhitekst

ISO 11228-2:2007

Ergonomics -- Manual handling -- Part 2: Pushing and pulling
Uusim versioon Kehtiv alates 30.03.2007