Tagasi

ISO 20552:2007

Workplace air -- Determination of mercury vapour -- Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry

Üldinfo
Kehtiv alates 06.02.2007
Direktiivid või määrused
puuduvad
Standardi ajalugu
Staatus
Kuupäev
Tüüp
Nimetus
06.02.2007
Põhitekst
ISO 20552:2007 specifies a procedure for determination of the mass concentration of mercury vapour in workplace air using a method of gold-amalgam collection with analysis by either cold vapour atomic absorption spectrometry (CVAAS) or cold vapour atomic fluorescence spectrometry (CVAFS). The procedure specifies a number of sampling methods for different applications. The procedure is suitable for making short-term measurements (e.g. 15 min) when sampling at a flow rate of between 100 ml per min and 1 000 ml per min. For assessment of long-term exposure, such as 8 h, this procedure can be used with sampling flow rate of 100 ml per min in workplaces where the concentration of mercury vapour is expected to be lower than 20 micrograms per cubic metre. If the expected concentration of mercury vapour is higher than 20 micrograms per cubic metre, it is necessary to use the procedure prescribed in ISO 17733. ISO 20552:2007 is unsuitable for making measurements of mercury vapour in air when chlorine is present in the atmosphere, e.g. in chloralkali works. Gaseous organo-mercury compounds can cause a positive interference.
*
*
*
PDF
136,52 € koos KM-ga
Paber
136,52 € koos KM-ga
Standardi monitooring
Teised on ostnud veel
Põhitekst

CEN/TS 14235:2002

Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overall migration
Uusim versioon Kehtiv alates 01.04.2003
Põhitekst

ISO 21438-2:2009

Workplace atmospheres -- Determination of inorganic acids by ion chromatography -- Part 2: Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid)
Uusim versioon Kehtiv alates 04.12.2009
Põhitekst

CEN/TR 13695-2:2019

Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment - Part 2: Requirements for measuring and verifying dangerous substances present in packaging, and their release into the environment
Uusim versioon Kehtiv alates 01.03.2019
Põhitekst

ISO/TR 21960:2020

Plastics -- Environmental aspects -- State of knowledge and methodologies
Uusim versioon Kehtiv alates 17.02.2020