Tagasi

prEN IEC 60751:2020

Industrial platinum resistance thermometers and platinum temperature sensors

Üldinfo
Kavand
Alusdokumendid
IEC 60751:202X; prEN IEC 60751:2020
Direktiivid või määrused
puuduvad
Standardi ajalugu
Staatus
Kuupäev
Tüüp
Nimetus
Põhitekst
07.11.2008
Põhitekst
This standard specifies the requirements and resistance versus temperature relationship for industrial platinum resistance thermometers later referred to as "thermometers" and industrial platinum resistance temperature sensors later referred to as “platinum resistors” whose electrical resistance is derived by defined function of temperature. The standard applies to platinum resistors whose temperature coefficient α is conventionally written as α = 3,851⋅10-3 °C-1. Values of temperature in this standard are in terms of the International Temperature Scale of 1990, ITS-90. Temperatures in degrees Celsius are denoted by the symbol t, except in Table A.1 where the full nomenclature t90/°C is used. The standard covers platinum resistors or thermometers for all or part of the temperature range -200 °C to +850 °C with different tolerance classes, which may cover restricted temperature ranges. For temperature/resistance relationships with uncertainties less than 0,1 °C, which are possible only for platinum resistors or thermometers with exceptionally high stability and individual calibration, a more complex interpolation equation than is presented in this standard may be necessary. The specification of such equations is outside the scope of this standard. In order for a thermometer to be compliant with this standard it shall be made from a platinum resistor which is compliant with this standard.
*
*
*
PDF
6,30 € koos KM-ga
Paber
6,30 € koos KM-ga
Standardi monitooring