Skip to main content
Tagasi

EVS-EN 848-2:2007+A2:2012

Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines CONSOLIDATED TEXT

Üldinfo

Kehtiv alates 06.11.2012
Alusdokumendid
EN 848-2:2007+A2:2012
Tegevusala (ICS grupid)
79.120.10 Puidutöötluspingid
Direktiivid või määrused
2006/42/EC Masinad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
06.11.2012
Põhitekst + muudatus
Põhitekst + muudatus
This document specifies all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable single spindle hand fed/integrated fed routing machines with fixed head but allowing only movement along the axis of the tool during machining hereinafter referred to as "machines" designed to cut solid wood, chip board, fibreboard, plywood and also these materials if they are covered with plastic laminate, edgings or veneer when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. For the definition of stationary and displaceable machine see 3.2.17 and 3.2.18. Machines which are designed to work wood based materials may also be used for working hardened plastic materials with similar physical characteristics as wood. This document does not apply to: a) inverted pin routers and radial arm routers (machines where the work piece is fixed and the tool head is manually moved); b) NC boring machines and NC routing machines; NC boring machines and NC routing machines are dealt with in EN 848-3:2007+A1:2009. c) hand-held routers or any adaptation permitting their use in a different mode, e.g. bench mounting; NOTE 1 Hand-held motor-operated electric tools are dealt with in EN 60745-1:2009 together with EN 60745-2-17:2003. d) routing machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand. The bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down. NOTE 2 Transportable motor-operated electric tools are dealt with in EN 61029-1:2000 together with EN 61029-2-8:2010. This document is not applicable to single spindle hand fed/integrated fed routing machines which are manufactured before the date of its publication as EN.

Nõutud väljad on tähistatud *

*
*
*
PDF
31,72 € koos KM-ga
Paber
31,72 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN ISO 4414:2010

Pneumoajamid. Üldreeglid ja ohutusnõuded süsteemidele ja nende komponentidele
Uusim versioon Kehtiv alates 05.01.2011
Põhitekst

EVS-EN ISO 13849-1:2015

Masinate ohutus. Juhtimissüsteemide ohutusega seotud osad. Osa 1: Kavandamise põhimõtted
Kehtetu alates 01.06.2023
Põhitekst

EVS-EN ISO 13850:2015

Masinate ohutus. Hädaseiskamisfunktsioon. Kavandamise põhimõtted
Uusim versioon Kehtiv alates 03.12.2015
Põhitekst

EVS-EN 60204-1:2018

Masinate ohutus. Masinate elektriseadmed. Osa 1: Üldnõuded
Uusim versioon Kehtiv alates 03.10.2018