Back

EVS-EN IEC 61076-2-111:2026

Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with m12 screw-locking

General information

Valid from 16.02.2026
Base Documents
EN IEC 61076-2-111:2026; IEC 61076-2-111:2025
ICS Groups
31.220.10 Plug-and-socket devices. Connectors
Directives or regulations
None

Standard history

Status
Date
Type
Name
16.02.2026
Main
EVS-EN IEC 61076-2-111:2026
16.03.2018
Main
EVS-EN IEC 61076-2-111:2018
This part of IEC 61076-2 describes 4- to 6-way circular connectors with M12 screw-locking with current ratings up to 16A rated current per contact and voltage ratings of 63 V or 630 V, that are typically used for power supply and power applications in industrial premises.
These connectors consist of both, fixed and free connectors either rewirable or non-rewirable. Male connectors have round contacts Ø1,0mm and Ø1,5mm.
The different codings provided by this document prevent the mating of differently coded male or female connectors to any other similarly sized interfaces, covered by other standards and the cross-mating between the different codings provided by this document.
NOTE M12 is the dimension of the thread of the screw locking mechanism of these circular connectors

Required fields are indicated with *

*
*
*
PDF
32.24 € incl tax
Paper
32.24 € incl tax
Browse standard from 2.48 € incl tax
Standard monitoring
English (PDF 627 KB)

Related products

Main

EVS-EN 60352-2:2006

Solderless connections Part 2: Crimped connections - General requirements, test methods and practical guidance
Withdrawn from 16.12.2024
Main

EVS-EN 61984:2009

Connectors - Safety requirements and tests
Newest version Valid from 07.08.2009
Amendment

EVS-EN 60352-2:2006/A1:2013

Solderless connections -- Part 2: Crimped connections - General requirements, test methods and practical guidance
Withdrawn from 16.12.2024
Main

EVS-EN IEC 60512-1:2018

Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification
Newest version Valid from 19.12.2018

Customers who bought this item also bought

Main

EVS-EN 61076-2-113:2017

Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz
Newest version Valid from 16.06.2017
Main

EVS-EN IEC 61076-2-101:2025

Connectors for electrical and electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
Newest version Valid from 15.01.2025

Standards designation

EVSEstonian standard
ENEuropean standard (published by an CEN or CENELEC)
EN ISOInternational standard adopted as an European standard
ISOInternational Organization for Standardization’s standard
IECInternational Electrotechnical Commission’s standard
HDCENELEC’s harmonisation document
EVS-ENEuropean standard implemented in Estonia
EVS-EN ISOInternational standard adopted in Europe and implemented in Estonia
EVS-EN ISO/IECInternational standard/International electrotechnical standard adopted in Europe and implemented in Estonia
EVS-IECInternational electrotechnical standard implemented in Estonia
EVS-ISO International standard implemented in Estonia
 
A, AMDamedment
+Aa full standard plus the amendment
/Aonly amendment
COR, ACcorrigendum
+CORa full standard plus the corrigendum
NAnational annex
+NAa full standard plus the national annex
/NAonly national annex
TStechnical specification
TRtechnical report
CWAagreement, developed by a CEN or CENELEC
prEVS-EN (etc)draft standard
 
etthe standard is in Estonian only
enthe standard is in English only
et-enthe standard is in Parallel text Estonian-English