Back

EVS-EN IEC 61238-1-2:2019

Compression and mechanical connectors for power cables - Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on insulated conductors

General information
Valid from 01.10.2019
Base Documents
IEC 61238-1-2:2018; EN IEC 61238-1-2:2019
Directives or regulations
None

Standard history

Status
Date
Type
Name
01.10.2019
Main
06.04.2006
Main
This part of EN 61238 applies to insulation piercing connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV), for example according to HD 603 or other buried cables and cables installed in buildings, having a) conductors complying with EN 60228 having nominal cross-sectional areas between 2,5 mm2 and 300 mm2 for copper and between 16 mm2 and 500 mm2 for aluminium, b) a maximum continuous cable temperature not exceeding the insulation material properties.
This document is not applicable to connectors for overhead line conductors nor to connectors with a sliding contact. The object of this document is to define the type test methods and requirements, which apply to insulation piercing connectors for power cables with copper or aluminium conductors. The reference method is to perform the tests on unused insulated conductors.
*
*
*
PDF
28.06 € incl tax
Paper
28.06 € incl tax
Browse standard from 2.44 € incl tax
Standard monitoring

Customers who bought this item also bought

Main

EVS-EN IEC 61238-1-1:2019

Compression and mechanical connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on non-insulated conductors
Newest version Valid from 01.10.2019
Main

EVS-EN IEC 61238-1-3:2019

Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 36 kV (Um = 42 kV) tested on non-insulated conductors
Newest version Valid from 01.10.2019
Main

EVS-EN IEC 60068-2-52:2018

Environmental testing - Part 2: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
Newest version Valid from 15.02.2018
Main

EVS-EN 60068-2-30:2006

Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
Newest version Valid from 07.09.2006