Skip to main content
Back

EVS-EN ISO 13857:2008

Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)

General information

Withdrawn from 01.11.2019
Base Documents
ISO 13857:2008; EN ISO 13857:2008
Directives or regulations
None

Standard history

Status
Date
Type
Name
01.11.2019
Main
08.05.2008
Main
Main
EVS-EN 294:1999
Main
EVS-EN 811:1999
This International Standard establishes values for safety distances in both industrial and non-industrial environments to prevent machinery hazard zones being reached. The safety distances are appropriate for protective structures. It also gives information about distances to impede free access by the lower limbs (see 4.3). This International Standard covers people of 14 years and older (the 5th percentile stature of 14 year olds is approximately 1 400 mm). In addition, for upper limbs only, it provides information for children older than 3 years  (5th percentile stature of 3 year olds is approximately 900 mm) where reaching through openings needs to be addressed.
NOTE 1  Data for preventing lower limb access for children is not considered. The distances apply when adequate safety can be achieved by distance alone. Because safety distances depend on size, there will be some people of extreme dimensions who will be able to reach hazard zones even when the requirements of this International Standard are complied with. NOTE 2  These safety distances wi l l not provide sufficient protection against certain hazards, for example, radiation and emission of substances. For such hazards, additional or other measures need to be taken. The clauses of the International Standard covering lower limbs apply when access by the upper limbs is not foreseeable according to the risk assessment. The safety distances are intended to protect those persons trying to reach hazard zones under the conditions specified (see 4.1.1). NOTE 3  This International Standard is not intended to provide measures against reaching a hazard zone by climbing over.

Required fields are indicated with *

*
*
*
PDF
19.52 € incl tax
Paper
19.52 € incl tax
Browse standard from 2.44 € incl tax
Standard monitoring

Customers who bought this item also bought

Main + amendment

EVS-EN 349:1998+A1:2008

Safety of machinery - Minimum gaps to avoid crushing of parts of the human body CONSOLIDATED TEXT
Withdrawn from 15.11.2019
Main

EVS-EN ISO 12100:2010

Safety of machinery - General principles for design - Risk assessment and risk reduction
Newest version Valid from 06.12.2010
Main

EVS-EN ISO 14120:2015

Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (ISO 14120:2015)
Newest version Valid from 03.12.2015
Main

EVS-EN ISO 13849-1:2015

Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
Withdrawn from 01.06.2023