Back

EVS-EN ISO 2507:2026

Thermoplastics pipes and fittings - Vicat softening temperature - General test method and test conditions for vinyl chloride-based (PVC-U, PVC-C, PVC-HI) and acrylonitrile-based (ABS, ASA) pipes and fittings (ISO 2507:2026)

General information

Valid from 16.02.2026
Base Documents
ISO 2507:2026; EN ISO 2507:2026
ICS Groups
23.040.20 Plastics pipes 23.040.45 Plastics fittings
Directives or regulations
None

Standard history

Status
Date
Type
Name
16.02.2026
Main
EVS-EN ISO 2507:2026
01.11.2017
Main
EVS-EN ISO 2507-1:2017
01.11.2017
Main
EVS-EN ISO 2507-2:2017
01.11.2017
Main
EVS-EN ISO 2507-3:2017
This document specifies a specific method for determining the Vicat softening temperature (VST) of thermoplastics pipes and fittings. It includes the adaption of method B 50 of ISO 306:2022 using a force of 50 N and a heating rate of 50 °C/h and the procedure for specimen preparation.
It includes the particular test conditions for determining the Vicat softening temperature (VST) of unplasticized poly(vinylchloride) (PVC-U) or chlorinated poly(vinylchloride) (PVC-C) pipes and fittings, for high impact resistance poly(vinylchloride) (PVC-HI) pipes and for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings.
This document can also be used for pipes and fittings from other materials (e.g. PE-UHMW).

Required fields are indicated with *

*
*
*
PDF
16.12 € incl tax
Paper
16.12 € incl tax
Browse standard from 2.48 € incl tax
Standard monitoring
English (PDF 602 KB)

Related products

Main

EVS-EN 13598-2:2020

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers
Newest version Valid from 02.06.2020
Main

EVS-EN 13598-2:2016

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers
Withdrawn from 02.06.2020
Main

EVS-EN ISO 9969:2016

Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
Newest version Valid from 02.03.2016
Main

EVS-EN 12007-2:2012

Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar)
Newest version Valid from 05.09.2012

Customers who bought this item also bought

Main

EVS-EN ISO 105-B02:2014

Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014)
Newest version Valid from 07.11.2014
Main

EVS-EN 1451-1:2017

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
Newest version Valid from 01.12.2017
Main

CEN ISO/TS 15875-7:2018

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2018)
Newest version Valid from 03.01.2019
Main

CEN/TS 1451-2:2019

Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity
Newest version Valid from 16.12.2019

Standards designation

EVSEstonian standard
ENEuropean standard (published by an CEN or CENELEC)
EN ISOInternational standard adopted as an European standard
ISOInternational Organization for Standardization’s standard
IECInternational Electrotechnical Commission’s standard
HDCENELEC’s harmonisation document
EVS-ENEuropean standard implemented in Estonia
EVS-EN ISOInternational standard adopted in Europe and implemented in Estonia
EVS-EN ISO/IECInternational standard/International electrotechnical standard adopted in Europe and implemented in Estonia
EVS-IECInternational electrotechnical standard implemented in Estonia
EVS-ISO International standard implemented in Estonia
 
A, AMDamedment
+Aa full standard plus the amendment
/Aonly amendment
COR, ACcorrigendum
+CORa full standard plus the corrigendum
NAnational annex
+NAa full standard plus the national annex
/NAonly national annex
TStechnical specification
TRtechnical report
CWAagreement, developed by a CEN or CENELEC
prEVS-EN (etc)draft standard
 
etthe standard is in Estonian only
enthe standard is in English only
et-enthe standard is in Parallel text Estonian-English