Back

ISO 9705-1:2016

Reaction to fire tests -- Room corner test for wall and ceiling lining products -- Part 1: Test method for a small room configuration

General information

Valid from 18.02.2016
ICS Groups
13.220.50 Fire-resistance of building materials and elements
Directives or regulations
None

Standard history

Status
Date
Type
Name
18.02.2016
Main
ISO 9705-1:2016
Main
ISO 9705:1993
ISO 9705-1:2016 specifies the test method to evaluate the reaction of wall and ceiling products to fire when installed at the surface of a small room and exposed directly to a specified ignition source. The test represents a fire scenario, which starts under well-ventilated conditions in a corner of a specified room with a single open doorway.
Tests performed in accordance with the method specified in this part of ISO 9705 provide data for the early stages of a fire from ignition up to flashover. The method does not evaluate the fire resistance of products.
The method is not intended to evaluate floor coverings. This method is not suitable for sandwich panel building systems, pipe insulation and fa�ades for which specific ISO standards (i.e. ISO 13784, ISO 20632 and ISO 13785, respectively) are available.

Required fields are indicated with *

*
*
*
PDF
241.44 € incl tax
Paper
241.44 € incl tax
Standard monitoring
English (PDF 286 KB)

Related products

Main

EVS-EN 16034:2014

Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics
Newest version Valid from 07.11.2014
Main + corrigendum

EVS-EN 1634-3:2004

Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 3: Smoke control test for door and shutter assemblies
Newest version Valid from 05.01.2005
Main

EVS-EN 1364-1:2015

Fire resistance tests for non-loadbearing elements - Part 1: Walls
Newest version Valid from 05.08.2015
Main

EVS-EN 1634-1:2014

Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable windows
Withdrawn from 01.02.2018

Customers who bought this item also bought

Main

ISO 11014:2009

Safety data sheet for chemical products -- Content and order of sections
Newest version Valid from 23.02.2009
Main

ISO 29769:2008

Thermal insulating products for building applications -- Determination of behaviour under point load
Newest version Valid from 30.10.2008
Main

ISO 7892:1988

Vertical building elements -- Impact resistance tests -- Impact bodies and general test procedures
Newest version Valid from 28.07.1988
Main

ISO 4898:2018

Rigid cellular plastics -- Thermal insulation products for buildings -- Specifications
Withdrawn from 13.10.2025

Standards designation

EVSEstonian standard
ENEuropean standard (published by an CEN or CENELEC)
EN ISOInternational standard adopted as an European standard
ISOInternational Organization for Standardization’s standard
IECInternational Electrotechnical Commission’s standard
HDCENELEC’s harmonisation document
EVS-ENEuropean standard implemented in Estonia
EVS-EN ISOInternational standard adopted in Europe and implemented in Estonia
EVS-EN ISO/IECInternational standard/International electrotechnical standard adopted in Europe and implemented in Estonia
EVS-IECInternational electrotechnical standard implemented in Estonia
EVS-ISO International standard implemented in Estonia
 
A, AMDamedment
+Aa full standard plus the amendment
/Aonly amendment
COR, ACcorrigendum
+CORa full standard plus the corrigendum
NAnational annex
+NAa full standard plus the national annex
/NAonly national annex
TStechnical specification
TRtechnical report
CWAagreement, developed by a CEN or CENELEC
prEVS-EN (etc)draft standard
 
etthe standard is in Estonian only
enthe standard is in English only
et-enthe standard is in Parallel text Estonian-English