Tagasi

CEN ISO/TS 17892-10:2004

Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests

Üldinfo
Kehtetu alates 03.01.2019
Alusdokumendid
ISO/TS 17892-10:2004; CEN ISO/TS 17892-10:2004
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
03.01.2019
Põhitekst
05.01.2005
Põhitekst
This document specifies laboratory test methods to establish the effective shear strength parameter for soils within the scope of the geotechnical investigations according to prEN 1997-1 and -2. The test method consists of placing the test specimen in the direct shear device, applying a pre-determined normal stress, providing for draining (and wetting if required) of the test specimen, or both, consolidating the specimen under normal stress, unlocking the frames that hold the specimen, and displacing one frame horizontally with respect to the other at a constant rate of shear-deformation and measuring the shearing force, and horizontal displacements as the specimen is sheared. Shearing is applied slowly enough to allow excess pore pressures to dissipate by drainage so that effective stresses are equal to total stresses.
*
*
*
PDF
13,42 € koos KM-ga
Paber
13,42 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

CEN ISO/TS 17892-7:2004

Geotechnical investigation and testing - Laboratory testing of soil - Part 7: Unconfined compression test on fine-grained soil
Kehtetu alates 01.03.2018
Põhitekst

EVS 908-1:2016

Hoone piirdetarindi soojusläbivuse arvutusjuhend. Osa 1: Välisõhuga kontaktis olev läbipaistmatu piire
Uusim versioon Kehtiv alates 05.07.2016
Põhitekst

EVS 932:2017

Ehitusprojekt
Uusim versioon Kehtiv alates 16.05.2017
Põhitekst

EVS-EN ISO 14688-1:2018

Geotehniline uurimine ja katsetamine. Pinnase identifitseerimine ja liigitamine. Osa 1: Identifitseerimine ja kirjeldamine
Uusim versioon Kehtiv alates 01.03.2018