Tagasi

CEN/TS 16800:2015

Guideline for the validation of physico-chemical analytical methods

Üldinfo
Kehtetu alates 31.12.2020
Alusdokumendid
CEN/TS 16800:2015
Direktiivid või määrused
puuduvad
Standardi ajalugu
Staatus
Kuupäev
Tüüp
Nimetus
31.12.2020
Põhitekst
05.01.2016
Põhitekst
This Technical Specification describes an approach for the validation of physico-chemical analytical methods for environmental matrices. The guidance in this document addresses two different validation approaches, in increasing order of complexity. These are: a) method development and validation at the level of single laboratories (intra-laboratory validation); b) method validation at the level of several laboratories (between-laboratory or inter-laboratory validation), with a focus on methods that are sufficiently mature and robust to be applied not only by a few expert laboratories but by laboratories operating at the routine level. The concept of these two approaches is strictly hierarchical, i.e. a method shall fulfil all criteria of the first level before it can enter the validation protocol of the second level. This Technical Specification is applicable to the validation of a broad range of quantitative physico-chemical analytical methods for the analysis of water (including surface water, groundwater, waste water, and sediment). Analytical methods for other environmental matrices, like soil, sludge, waste, and biota can be validated in the same way. It is intended either for analytical methods aiming at substances that have recently become of interest or for test methods applying recently developed technologies. The minimal requirements that are indispensable for the characterization of the fitness for purpose of an analytical method are: selectivity, precision, bias and measurement uncertainty. The aim of validation is to prove that these requirements are met.
*
*
*
PDF
20,50 € koos KM-ga
Paber
20,50 € koos KM-ga
Hind: 2,40 € koos KM-ga
Standardi monitooring
Teised on ostnud veel
Põhitekst

EVS-EN ISO 15681-2:2018

Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Part 2: Method by continuous flow analysis (CFA) (ISO 15681-2:2018)
Uusim versioon Kehtiv alates 19.12.2018
Põhitekst

ISO 21676:2018

Water quality -- Determination of the dissolved fraction of selected active pharmaceutical ingredients, transformation products and other organic substances in water and treated waste water -- Method using high performance liquid chromatography and mass spectrometric detection (HPLC-MS/MS or -HRMS) after direct injection
Uusim versioon Kehtiv alates 15.10.2018
Põhitekst

ISO/TS 21231:2019

Water quality -- Characterization of analytical methods -- Guidelines for the selection of a representative matrix
Uusim versioon Kehtiv alates 05.02.2019
Põhitekst

EVS-EN ISO 9680:2014

Dentistry - Operating lights (ISO 9680:2014)
Uusim versioon Kehtiv alates 09.12.2014