Tagasi

EVS-EN 12020-1:2008

Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery

Üldinfo
Kehtiv alates 09.06.2008
Alusdokumendid
EN 12020-1:2008
Tegevusala (ICS grupid)
77.150.10 Alumiiniumtooted
Direktiivid või määrused
puuduvad
Standardi ajalugu
Staatus
Kuupäev
Tüüp
Nimetus
09.06.2008
Põhitekst
Põhitekst
This document specifies technical conditions for inspection and delivery of alloys EN AW-6060 and EN AW-6063 extruded precision profiles manufactured with and without a thermal barrier (see Figures 1 and 2) and without further surface treatment. Precision profiles covered in this document are distinguished from extruded profiles for general applications covered in EN 755-9 by the following characteristics: - they are mainly for architectural applications; - they meet more stringent requirements regarding the surface condition of visible surfaces; - the maximum diameter of the circumscribing circle CD is 350 mm; - they are made to closer tolerances on dimensions and form. In the case of profiles, which, due to the complexity of their design are difficult to manufacture and specify, then special agreements between supplier and purchaser may need to be reached. NOTE The effect of the thermal barrier material on the dimensional tolerances is covered by EN 12020-2 although the actual thermal barrier material itself is not (see EN 14024).
*
*
*
PDF
9,61 € koos KM-ga
Paber
9,61 € koos KM-ga
Hind: 2,40 € koos KM-ga
Standardi monitooring
Teised on ostnud veel
Põhitekst

EVS-EN 12020-2:2016

Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form
Uusim versioon Kehtiv alates 03.01.2017
Põhitekst

EVS-EN 14392:2007

Aluminium and aluminium alloys - Special requirements for anodised products for use in contact with foodstuff
Uusim versioon Kehtiv alates 08.01.2008
Põhitekst

EVS-EN 573-3:2013

Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
Kehtetu alates 16.09.2019
Põhitekst

EVS-EN 15088:2006

Alumiinium ja alumiiniumsulamid. Ehituskonstrutsioonitooted. Tehnilised kontrolli- ja tarnetingimused
Uusim versioon Kehtiv alates 08.03.2006