Tagasi

EVS-EN 12020-1:2022

Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery

Üldinfo
Kehtiv alates 01.04.2022
Alusdokumendid
EN 12020-1:2022
Tegevusala (ICS grupid)
77.150.10 Alumiiniumtooted
Direktiivid või määrused
puuduvad
Standardi ajalugu
Staatus
Kuupäev
Tüüp
Nimetus
01.04.2022
Põhitekst
09.06.2008
Põhitekst
This document specifies technical conditions for inspection and delivery of alloys EN AW-6060 and EN AW-6063 extruded precision profiles manufactured with and without a thermal barrier (see Figures 1 and 2) and without further surface treatment. Precision profiles for which this document is applicable are distinguished from extruded profiles for general applications covered in EN 755-9 by the following characteristics: — they are designed with mostly uniform wall-thicknesses; — they are mainly used for mechanical engineering, architectural and automotive (except crash-elements) applications; — the maximum weight by meter is 10 kg/m; — the max. wall-thickness proportion (tmax/tmin) of 3,5. In the case of profiles, which, due to the complexity of their design are difficult to manufacture and specify, then special agreements between supplier and purchaser may need to be reached. NOTE The effect of the thermal barrier material on the dimensional tolerances is covered by EN 12020-2 although the actual thermal barrier material itself is not (see EN 14024).
*
*
*
PDF
8,86 € koos KM-ga
Paber
8,86 € koos KM-ga
Sirvi standardit: 2,40 € koos KM-ga
Standardi monitooring
Teised on ostnud veel
Põhitekst

EVS-EN 755-9:2016

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
Uusim versioon Kehtiv alates 05.07.2016
Põhitekst

EVS-EN 12020-2:2016

Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form
Uusim versioon Kehtiv alates 03.01.2017
Põhitekst

EVS-EN 4566:2022

Aerospace series - Heat resisting alloy CO-PH4101 (CoCr20W15N1) -Vacuum melted - Solution treated - Forgings - De ≤ 100 mm
Uusim versioon Kehtiv alates 01.04.2022
Põhitekst

EVS-EN 851:2022

Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications
Uusim versioon Kehtiv alates 01.04.2022