Skip to main content
Tagasi

EVS-EN 1501-1:2011+A1:2015

Prügikogumissõidukid. Põhi- ja ohutusnõuded. Osa 1: Tagantlaadimisega prügikogumissõidukid

Üldinfo

Kehtetu alates 15.04.2021
Alusdokumendid
EN 1501-1:2011+A1:2015
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
15.04.2021
Põhitekst
07.05.2015
Põhitekst + muudatus
04.10.2011
Põhitekst
EVS-EN 1501-1:2011
This European Standard applies to rear loaded refuse collection vehicles (RCV), as defined in 3.2.
This European Standard deals with all significant hazards, hazardous situations and events relevant to the rear loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.
This European Standard is applicable to the design and construction of the rear loaded RCV so as to ensure that it is fit for its function and can be operated, adjusted and maintained during its entire lifetime. It is not applicable to the end of life of the rear loaded RCV.
This part 1 describes and defines the safety requirements of rear loaded RCVs excluding the interface tailgate/discharge door with the lifting device(s) and the lifting device(s) as illustrated in Figure A.1.
Safety requirements for the lifting device(s) and the interface with the tailgate/discharge door are defined in EN 1501-5.
This European Standard is not applicable to:
-  operation in severe conditions, e.g. extreme environmental conditions such as:
-  below - 25 °C and above + 40 °C temperatures;
-  tropical environment;
-  wind velocity in excess of 75 km/h;
-  contaminating environment;
-  corrosive environment;
-  operation in potentially explosive atmospheres;
-  handling of loads the nature of which could lead to dangerous situations (e.g. hot wastes, acids and bases, radioactive materials, contaminated waste, especially fragile loads, explosives);
-  operation on ships.
This European Standard is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

Nõutud väljad on tähistatud *

*
*
*
PDF
31,72 € koos KM-ga
Paber
31,72 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 60204-1:2018

Masinate ohutus. Masinate elektriseadmed. Osa 1: Üldnõuded
Uusim versioon Kehtiv alates 03.10.2018
Põhitekst

EVS-EN ISO 13849-1:2015

Masinate ohutus. Juhtimissüsteemide ohutusega seotud osad. Osa 1: Kavandamise põhimõtted
Kehtetu alates 01.06.2023
Põhitekst

EVS-EN 12012-1:2018

Kummi- ja plastitöötlusmasinad. Suurust vähendavad masinad. Osa 1: Ohutusnõuded labagranulaatoritele ja purustitele
Uusim versioon Kehtiv alates 16.10.2018
Põhitekst

EVS-EN ISO 12100:2010

Masinate ohutus. Projekteerimise, riskide hindamise ja riskide vähendamise üldised põhimõtted
Uusim versioon Kehtiv alates 06.12.2010