Tagasi

EVS-EN 16770:2018

Puidutöötlemismasinate ohutus. Siseruumidesse paigaldatavad hakise- ja tolmueemaldussüsteemid. Ohutusnõuded

Üldinfo
Kehtiv alates 03.10.2018
Alusdokumendid
EN 16770:2018
Tegevusala (ICS grupid)
79.120.10 Puidutöötluspingid
Direktiivid või määrused
2006/42/EC Masinad
Standardi ajalugu
Staatus
Kuupäev
Tüüp
Nimetus
03.10.2018
Põhitekst
This document deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant for chip and dust extraction systems for indoor use designated to be connected to woodworking machines, when they are used as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse. This document does not apply to: a) extraction systems with a nominal volume flow rate above 8 000 m3 h−1 and/or a volume of the dust loaded part of the dust extractor above 3,5 m3; b) vacuum cleaners according to EN 60335-2-69; c) extraction systems with fans installed in the dust loaded part; d) extraction equipment (e.g. extraction hoods, ducts) within a woodworking machine, i.e. up to and including the outlet to which the extraction system is connected; e) extraction systems designed for dust with KST values above 200 bar ms−1, minimum ignition energy below 10 mJ and/or lower explosion level below 30 g m−3; f) extraction systems designed for aspiration of explosive atmospheres, e.g. dust load > 50 % lower explosion level; g) systems designed for extraction of machines with a higher risk of causing ignition sources. This document is not applicable to machines which are manufactured before the date of its publication as a European Standard.
*
*
*
PDF
18,48 € koos KM-ga
Paber
18,48 € koos KM-ga
Sirvi standardit: 2,40 € koos KM-ga
Standardi monitooring
Teised on ostnud veel
Põhitekst

EVS-EN 12779:2015

Puidutöötlemismasinate ohutus. Statsionaarselt paigaldatud hakise- ja tolmueemaldussüsteemid. Ohutusnõuded
Uusim versioon Kehtiv alates 05.01.2016
Muudatus

EVS-EN 1993-1-1:2005/A1:2014

Eurokoodeks 3: Teraskonstruktsioonide projekteerimine. Osa 1-1: Üldreeglid ja reeglid hoonete projekteerimiseks
Kehtiv alates 05.06.2014
Põhitekst

ISO/TR 20218-1:2018

Robotics -- Safety design for industrial robot systems -- Part 1: End-effectors
Uusim versioon Kehtiv alates 16.08.2018
Põhitekst

EVS-EN IEC/IEEE 82079-1:2020

Preparation of information for use (instructions for use) of products - Part 1: Principles and general requirements (IEC/IEEE 82079-1:2019)
Uusim versioon Kehtiv alates 15.04.2020