Tagasi

EVS-EN 1870-3:2014

Puidutöötlemismasinate ohutus. Ketassaagimismasinad. Osa 3: Allaliikumisel lõikavad järkamissaed ja kokkuehitatud allaliikumisel lõikavad järkamissaed/ketassaagimispingid

Üldinfo
Kehtetu alates 17.04.2023
Alusdokumendid
EN 1870-3:2014
Tegevusala (ICS grupid)
79.120.10 Puidutöötluspingid
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
12.01.2015
Põhitekst
03.04.2009
Põhitekst + muudatus
This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches, herein after referred to as "machines", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic edging and/or plastic/light alloy laminates when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse.
NOTE 1  For the definition of down cutting cross-cut saws and dual purpose down cutting cross -cut saws/circular saw benches, see 3.2.2, 3.2.3 and 3.2.4, and for the definition of displaceable machine, see 3.2.8.
This document does not apply to:
-  machines for cross cutting logs;
-  hand-held motor-operated electric tools or any adaptation permitting their use in a different mode, i.e. bench mounting;
NOTE 2  Hand-held motor-operated electric tools and saw benches to form an integrated whole with a hand-held motor-operated electric tools are covered by EN 60745-1:2009 together with EN 60745-2-5:2010.
-  transportable machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand i.e. maximum mass ≤ 25 kg.
NOTE 3  Transportable motor-operated electric tools are covered by the requirements of EN 61029-1:2009 together with EN 61029-2-9:2009 and EN 61029-2-11:2009.
This document is not applicable to down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches which are manufactured before the date of its publication as European Standard.
*
*
*
PDF
28,06 € koos KM-ga
Paber
28,06 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 1870-19:2013

Puidutöötlemismasinate ohutus. Ketassaagmasinad. Osa 19: Universaalsed (liuglauaga ja ilma) ning ehitusplatsi saed
Kehtetu alates 17.06.2019
Põhitekst

EVS-EN 1870-18:2013

Puidutöötlemismasinate ohutus. Ketassaagimisseadmed. Osa 18: Formaatsaed
Kehtetu alates 04.09.2017
Põhitekst

EVS-EN 15273-1:2013

Raudteealased rakendused. Gabariidid. Osa 1: Üldist. Üldreeglid taristule ja raudteeveeremile
Kehtetu alates 16.05.2017
Põhitekst

EVS-EN ISO 14119:2013

Masinaohutus. Kaitsepiiretega ühendatud blokeerimisseadised. Kavandamise ja valiku põhimõtted
Uusim versioon Kehtiv alates 14.11.2013