Skip to main content
Tagasi

EVS-EN 60793-1-32:2010

Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability

Üldinfo

Kehtetu alates 03.01.2019
Alusdokumendid
IEC 60793-1-32:2010; EN 60793-1-32:2010
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
03.01.2019
Põhitekst
04.11.2010
Põhitekst
Põhitekst
EVS-EN 60793-1-32:2004
This part of IEC 60793 is intended primarily for testing either fibres as produced by a fibre manufacturer or subsequently overcoated (tight buffered) using various polymers. The test can be performed either on fibres as produced or after exposure to various environments. This test applies to A1, A2, A3, B and C fibres. The object of this standard is to establish uniform requirements for the mechanical characteristic – coating strippability. This test quantifies the force required to mechanically remove the protective coating from optical fibres along their longitudinal axis. This test is not intended as a means to maximize fibre strength after the coating is removed nor is it intended to specify the best conditions for field stripping of optical fibres. This test is designed for optical fibres having polymeric coatings with nominal outer diameters in the range of 240 μm to 900 μm. Application of this method to fibres with outer coating diameters outside the range of 230 μm to 930 μm is not recommended. Warning – Fibres can fracture while being stripped and pierce skin and eyes. Use of protective eyewear is recommended.

Nõutud väljad on tähistatud *

*
*
*
PDF
12,20 € koos KM-ga
Paber
12,20 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Muudatus

EVS-EN 61034-1:2005/A1:2014

Suitsu tiheduse mõõtmine kaablite põletamisel määratletud oludes. Osa 1: Katseaparatuur
Uusim versioon Kehtiv alates 06.05.2014
Põhitekst

EVS-EN 60793-1-20:2014

Optical fibres -- Part 1-20: Measurement methods and test procedures - Fibre geometry
Uusim versioon Kehtiv alates 09.12.2014
Põhitekst

EVS-EN 60793-1-43:2015

Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement
Uusim versioon Kehtiv alates 08.06.2015
Põhitekst

EVS-EN 60794-1-21:2015

Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods
Kehtiv alates 08.06.2015