Skip to main content
Tagasi

EVS-EN IEC 60404-8-11:2018

Magnetic materials - Part 8-11: Specifications for individual materials - Fe-based amorphous strip delivered in the semi-processed state

Üldinfo

Kehtiv alates 16.07.2018
Alusdokumendid
IEC 60404-8-11:2018; EN IEC 60404-8-11:2018
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
16.07.2018
Põhitekst
IEC 60404-8-11:2018 defines the grades of Fe-based amorphous strip delivered in the semi‑processed state, i.e. without final heat treatment, of nominal thickness 0,025 mm. Other nominal thicknesses in the range from 0,020 mm to 0,030 mm can be specified by agreement between the manufacturer and the purchaser at the time of enquiry and order. In particular, it gives general requirements, magnetic properties, geometric characteristics, tolerances and technological characteristics, as well as inspection procedures.
This document applies to the rapidly-solidified Fe-based amorphous strip supplied in coils with as-cast edges and intended for the construction of magnetic circuits.
The grades are grouped into two classes:
- conventional grades;
- high permeability grades.
They correspond to Class I1 of IEC 60404-1.

Nõutud väljad on tähistatud *

*
*
*
PDF
19,52 € koos KM-ga
Paber
19,52 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Muudatus

EVS-EN 60404-15:2012/A1:2017

Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials
Uusim versioon Kehtiv alates 02.03.2017
Põhitekst

EVS-EN 60404-8-6:2017

Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials
Uusim versioon Kehtiv alates 03.05.2017
Põhitekst

EVS-EN 60404-1:2017

Magnetic materials - Part 1: Classification
Uusim versioon Kehtiv alates 03.02.2017
Põhitekst

EVS-EN IEC 60404-6:2018

Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
Uusim versioon Kehtiv alates 01.08.2018