Skip to main content
Tagasi

EVS-EN IEC 61010-2-012:2022

Ohutusnõuded elektrilistele mõõtmis-, juhtimis- ja laboratooriumiseadmetele. Osa 2-012: Erinõuded kliima- ja keskkonnaalastele katsetusseadmetele ja muudele temperatuuri konditsioneerimise seadmetele

Üldinfo

Kehtiv alates 17.05.2022
Alusdokumendid
IEC 61010-2-012:2019; EN IEC 61010-2-012:2022
Direktiivid või määrused
2014/35/EU Madalpinge

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
01.06.2022
Põhitekst + muudatus
17.05.2022
Põhitekst
06.12.2016
Põhitekst
IEC 61010-2-012:2019 specifies safety requirements for electrical equipment and its accessories within the categories a) through c), wherever it is intended to be used, whenever that equipment incorporates one or more of the following characteristics:
– A refrigerating system that is acted on or impacted by an integral heating function such that the combined heating and refrigerating system generates additional and/or more severe hazards than those for the two systems if treated separately.
– The materials being treated in the intended application introduce significant heat into the refrigerating system, so that the refrigerating system in the application yields additional and/or more severe hazards than those for the refrigerating system if operated at the maximum rated ambient temperature alone.
– An irradiation function for the materials being treated presenting additional hazards.
– A function to expose the materials being treated to excessive humidity, carbon dioxide, salt mist, or other substances which can result in additional hazards.
– A function of mechanical movement presenting additional hazards.
– Provision for an operator to walk in to the operating area to load or unload the materials being treated.
It has the status of a group safety publication in accordance with IEC Guide 104.
This second edition cancels and replaces the first edition published in 2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) alignment with changes introduced by Amendment 1 of IEC 61010-1:2010;
b) changes related to the use of small capitals for defined terms only;
c) clarifications for cooling tests in 4.4.2.10;
d) requirements for overtemperature protection in 10.101, including deletion of the second part of the sentence in item b), and the deletion of item c);
e) changes pertaining to the accurate employment of terms "temperature", "operating temperature", "working temperature", "application temperature", "room temperature" and "ambient temperature" in 3.5.104, 3.5.105, 4.3.1, 4.3.2, 5.4.2, 8.2.1, 8.2.2, 11.7.2.101.2, 11.7.2.101.3, 13.2.102, 14.102, 15.101, 15.102, 15.103, Introduction and many other locations. For the purpose of clarification, the definition of 3.5.114, controlled temperature, is added.

Nõutud väljad on tähistatud *

*
*
*
PDF
39,04 € koos KM-ga
Paber
39,04 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst + muudatus

EVS-EN 12621:2006+A1:2010

Masinad kattematerjalide etteandmiseks ja tsirkuleerimiseks rõhu all. Ohutusnõuded
Uusim versioon Kehtiv alates 05.01.2011
Põhitekst

EVS-EN 1953:2013

Kattematerjalide pihustus- ja pritsimisseadmed. Ohutusnõuded
Uusim versioon Kehtiv alates 14.11.2013
Põhitekst

ISO 2471:2008

Paper and board -- Determination of opacity (paper backing) -- Diffuse reflectance method
Uusim versioon Kehtiv alates 03.12.2008
Põhitekst

EVS-EN ISO 13854:2019

Masinaohutus. Minimaalsed vahemikud vältimaks inimese kehaosade muljumist
Uusim versioon Kehtiv alates 15.11.2019