Tagasi

EVS-EN IEC 61472-2:2021

Live working - Minimum approach distances - Part 2: Method of determination of the electrical component distance for AC systems from 1,0 kV to 72,5 kV

Üldinfo
Kehtiv alates 03.05.2021
Alusdokumendid
IEC 61472-2:2021; EN IEC 61472-2:2021
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
03.05.2021
Põhitekst
IEC 61472-2:2021 specifies a method for determining the electrical component of the minimum approach distances for live working, for AC systems 1 kV up to and including 72,5 kV. This document addresses system overvoltages and the working air distances between equipment and/or workers at different potentials.
The withstand voltage and minimum approach distances determined by the method described in this document can be used only if the following working conditions prevail:
- workers are trained for, and skilled in, working live lines or close to live conductors or equipment;
- the operating conditions are adjusted so that the statistical overvoltage does not exceed the value selected for the determination of the required withstand voltage;
- transient overvoltages are the determining overvoltages;
- tool insulation has no continuous film of moisture present on the surface;
- no lightning is observed within 10 km of the work site;
- allowance is made for the effect of the conducting components of tools.
*
*
*
PDF
13,42 € koos KM-ga
Paber
13,42 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 61472:2013

Live working - Minimum approach distances for AC systems in the voltage range 72,5 kV to 800 kV - A method of calculation (IEC 61472:2013)
Uusim versioon Kehtiv alates 05.08.2013