EVS-EN IEC 62368-3:2020

Audio-, video-, informatsiooni- ja kommunikatsioonitehnika seadmed. Ohutus. Osa 3: Alalisvoolu-jõuedastus läbi kommunikatsioonikaablite või -portide

Kehtiv alates 02.04.2020
IEC 62368-3:2017; EN IEC 62368-3:2020
Direktiivid või määrused
Standardi ajalugu
IEC 62368-3:2017 applies to equipment intended to supply and receive operating power through communication cables or ports. It covers particular requirements for circuits that are designed to transfer DC power from a power sourcing equipment (PSE) to a powered device (PD). The power transfer uses voltages at ES1 or ES2 or in very specific cases voltage levels at ES3. Any cable provided with a connector defined by an industry standard that permits DC power transfer between equipment is considered a communication cable even if communication does not take place. For example, a USB cable can be used just to recharge a portable device battery. International Standard is to be used in conjunction with IEC 62368-1:2014. It has the status of a group safety publication in accordance with IEC Guide 104. The subclauses of IEC 62368-1 apply as far as reasonable. Where safety aspects are similar to those of IEC 62368-1, the relevant clause or subclause of IEC 62368-1 is given for reference in a note in the relevant subclause. Where a requirement in IEC 62368-3 refers to a requirement or criterion of IEC 62368-1, a specific reference to IEC 62368-1 is made. This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the preparation of standards for products similar to those mentioned in the scope of this standard, in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51.
15,86 € koos KM-ga
15,86 € koos KM-ga
Hind: 2,40 € koos KM-ga
Standardi monitooring
Teised on ostnud veel
Põhitekst + muudatus

EVS-EN IEC 62368-1:2020+A11:2020

Audio-, video-, informatsiooni- ja sidetehnoloogia seadmed. Osa 1: Ohutusnõuded
Uusim versioon Kehtiv alates 15.04.2020

EVS-EN IEC 61000-4-11:2020

Elektromagnetiline ühilduvus (EMÜ). Osa 4-11: Katsetus- ja mõõtetehnika. Pingelohkude, lühikatkestuste ja pingemuutuste taluvuse katsetused seadmetele sisendvooluga kuni 16 A faasi kohta
Uusim versioon Kehtiv alates 04.05.2020

EVS-EN IEC 60204-11:2019

Masinate ohutus. Masinate elektriseadmed. Osa 11: Kõrgepingeseadmetele esitatavad nõuded vahelduvpingel üle 1000 V kuni 36 kV või alalispingel üle 1500 V kuni 36 kV
Uusim versioon Kehtiv alates 01.02.2019

EVS-EN 61010-1:2010/A1:2019

Ohutusnõuded elektrilistele mõõtmis-, juhtimis- ja laboratooriumiseadmetele. Osa 1: Üldnõuded
Uusim versioon Kehtiv alates 01.03.2019