Back

EVS-EN 16798-7:2017

Energy performance of buildings - Ventilation for buildings - Part 7: Calculation methods for the determination of air flow rates in buildings including infiltration (Modules M5-5)

General information
Valid from 05.07.2017
Base Documents
EN 16798-7:2017
Directives or regulations
None

Standard history

Status
Date
Type
Name
05.07.2017
Main
04.07.2007
Main
This European Standard describes the methods to calculate the ventilation air flow rates for buildings
to be used for energy calculations evaluation, heating and cooling loads.
This European Standard applies to buildings with:
- Mechanical ventilation systems (mechanical exhaust, mechanical supply or balanced system);
- Passive duct ventilation systems for residential and low-rise non-residential buildings;
- Combustion appliances;
- Windows opening by manual operation;
- Kitchens where cooking is for immediate use (including restaurants)
This European Standard is applicable to hybrid systems combining mechanical and passive duct ventilation systems in residential and low-rise non-residential buildings.
This European Standard applies to buildings smaller than 100 m and rooms where vertical air temperature difference is smaller than 15 K.
The results provided by the standard are:
the air flow rates entering or leaving a ventilation zone;
- the air flow rates required to be distributed by the mechanical ventilation system, if present.
This European Standard is not applicable to:
- Buildings with kitchens where cooking is not for immediate use
- Buildings with automatic windows (or openings)
- Buildings with industry process ventilation.
The definition of ventilation and airtightness requirements (as indoor air quality, heating and cooling, safety, fire protection…) is not covered by this standard.
The following information can be found in other standards and technical reports:
- guidance to estimate pressure drops in ducts (CR 14378:2002)
Table 1 shows the relative position of this standard within the EN EPB package of standards.
*
*
*
PDF
28.06 € incl tax
Paper
28.06 € incl tax
Browse standard from 2.44 € incl tax
Standard monitoring

Customers who bought this item also bought

Main

EVS-EN 16798-3:2017

Energy performance of buildings - Ventilation for buildings - Part 3: For non-residential buildings - Performance requirements for ventilation and room-conditioning systems (Modules M5-1, M5-4)
Newest version Valid from 03.10.2017
Main

EVS-EN 16798-5-2:2017

Energy performance of buildings - Ventilation for buildings - Part 5-2: Calculation methods for energy requirements of ventilation systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 2: Distribution and generation
Newest version Valid from 04.09.2017
Main

EVS-EN 16798-5-1:2017

Energy performance of buildings - Ventilation for buildings - Part 5-1: Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 1: Distribution and generation
Newest version Valid from 16.06.2017
Main

EVS-EN ISO 13370:2017

Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:2017)
Newest version Valid from 16.08.2017