Back

EVS-EN IEC 60034-14:2018

Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity

General information

Valid from 02.11.2018
Base Documents
IEC 60034-14:2018; EN IEC 60034-14:2018
ICS Groups
29.160 Rotating machinery
Directives or regulations
None

Standard history

Status
Date
Type
Name
Main
prEN IEC 60034-14:2026
02.11.2018
Main
EVS-EN IEC 60034-14:2018
06.09.2007
Amendment
EVS-EN 60034-14:2004/A1:2007
04.06.2004
Main
EVS-EN 60034-14:2004
IEC 60034-14:2018 specifies the factory acceptance vibration test procedures and vibration limits for certain electrical machines under specified conditions, when uncoupled from any load or prime mover. It is applicable to DC and three-phase AC machines, with shaft heights 56 mm and higher and a rated output up to 50 MW, at operational speeds from 120 min–1 up to and including 15 000 min–1. This new edition includes the following significant technical changes with respect to the previous edition:
- Improved explanation of the definition “free suspension”.
- Addition of an alternative method of rigid mount
- Definition of an improved option for shaft key.

Required fields are indicated with *

*
*
*
PDF
16.12 € incl tax
Paper
16.12 € incl tax
Browse standard from 2.48 € incl tax
Standard monitoring
English (PDF 450 KB)

Related products

Main + corrigendum

EVS-EN 60034-1:2010

Rotating electrical machines - Part 1: Rating and performance
Newest version Valid from 04.11.2010
Main

EVS-EN 60034-30-1:2014

Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)
Withdrawn from 02.02.2026
Main

EVS-EN 60034-2-1:2014

Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
Withdrawn from 02.05.2024
Main

EVS-EN 60034-18-41:2014

Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests
Newest version Valid from 01.07.2014

Customers who bought this item also bought

Main

EVS-EN 60034-6:2001

Rotating electrical machines - Part 6: Methods of cooling (IC code)
Newest version Valid from 01.04.2001
Main + amendment

EVS-EN 60529:2001+A2:2014

Degrees of protection provided by enclosures (IP code) (IEC 60529:1989 + IEC 60529:1989/A1:1999 + IEC 60529:1989/A2:2013)
Newest version Valid from 01.04.2014
Main

EVS-EN ISO 13850:2015

Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
Newest version Valid from 03.12.2015
Main

EVS-EN ISO 9906:2012

Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3 (ISO 9906:2012)
Newest version Valid from 05.06.2012

Standards designation

EVSEstonian standard
ENEuropean standard (published by an CEN or CENELEC)
EN ISOInternational standard adopted as an European standard
ISOInternational Organization for Standardization’s standard
IECInternational Electrotechnical Commission’s standard
HDCENELEC’s harmonisation document
EVS-ENEuropean standard implemented in Estonia
EVS-EN ISOInternational standard adopted in Europe and implemented in Estonia
EVS-EN ISO/IECInternational standard/International electrotechnical standard adopted in Europe and implemented in Estonia
EVS-IECInternational electrotechnical standard implemented in Estonia
EVS-ISO International standard implemented in Estonia
 
A, AMDamedment
+Aa full standard plus the amendment
/Aonly amendment
COR, ACcorrigendum
+CORa full standard plus the corrigendum
NAnational annex
+NAa full standard plus the national annex
/NAonly national annex
TStechnical specification
TRtechnical report
CWAagreement, developed by a CEN or CENELEC
prEVS-EN (etc)draft standard
 
etthe standard is in Estonian only
enthe standard is in English only
et-enthe standard is in Parallel text Estonian-English