EVS-EN IEC 60034-23:2019

Rotating electrical machines - Part 23: Repair, overhaul and reclamation

General information
Valid from 01.04.2019
Base Documents
IEC 60034-23:2019; EN IEC 60034-23:2019
Directives or regulations

Standard history

This part of IEC 60034 covers the procedures necessary to ensure the satisfactory repair, overhaul, and reclamation of all types and sizes of rotating electrical machines covered by the IEC 60034 series. The standard creates a generic industry procedure covering common aspects of a complete repair. The scope of work depends on the machine type, rating, condition, and the importance of plant reliability and safety. It includes
- determining cause of failure, where necessary;
- determining the extent of repair, as applicable;
- defining revised performance, operating and ambient conditions, if required;
- reviewing the original design, and upgrading the specification of the design, if required;
- proving the quality and performance of the repaired machine, maintaining or improving the rated energy efficiency;
- ensuring environmental considerations are taken into account.
This document does not supersede the requirements prescribed in IEC 60079-19 or elsewhere concerning the repair and overhaul for machines used in explosive atmospheres.
Machines for special applications such as hermetic, submersible, nuclear, hydrogen cooled machines, military, aviation and traction motors might have additional requirements, which are the subject of agreement between the service facility and user.
This document is not intended to take the place of the original machine manufacturer’s instructions and recommendations.
Re-designs and performance changes requiring machine designer input are beyond the scope of this document.
27.60 € incl tax
27.60 € incl tax
Browse a standard: 2.40 € incl tax
Standard monitoring

Customers who bought this item also bought


EVS-EN IEC 60079-19:2019

Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation
Newest version Valid from 02.01.2020

EVS-EN IEC 60034-14:2018

Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity
Newest version Valid from 02.11.2018

EVS-EN 60034-18-41:2014/A1:2019

Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests
Newest version Valid from 01.10.2019

EVS-EN 60034-8:2007/A1:2014

Rotating electrical machines - Part 8: Terminal markings and direction of rotation
Newest version Valid from 01.07.2014